Zinc-Aluminum with Ramp Resistance One Side Metallizion OPP Film Metallized Film for Capacitor Use 2-12um

Min.Order: 10

Product origin: Tongling, Anhui, China

Infringement complaint:

Complaint

US$ 5.98 ~ 10

Description

Metallized film for capacitor use

Types of Metallized Layer

Base film	PP	PET
Normal thickness	2.0μm ~12.0μm	1.9μm ~12.0μm
Margin type	Single, two margins
Coating metal	Zinc-Aluminum alloy,Aluminum
Coating side	Single,two sides
Edge structure	Heavy edge
Cutting type	Straight cut, wave cut

Wave cuting

4 wave cut machines, productivity accounts for 5%.

There are two types of wave cut: wave cut at metal edge, and wave cut at free edge.

Wave length: 2.5±1.5mm
Wave Amplitude: 0.3±0.1mm

Square resistance

Reinforced resistance	Normal resistance
(2~4)Ω/	(6~9)Ω/
(1~3)Ω/	(4~6)Ω/
(1~3)Ω/	(12~18)Ω/
(2~4)Ω/	(17~23)Ω/

Normal film Width and Margin
Remarks: The required square resistance, width and margin can be customized according to customer needs.

Film type

One side metallization film with Zinc-Aluminum with heavy edge (Single Margin)
One side metallization OPP film with Zinc-Aluminum with ramp resistance (Single Margin)
One side metallization OPP film with Zinc-Aluminum with high resistance (Single Margin)
Double side metallization PET film with Aluminum (Center margin)
One side metallization OPP film with Aluminum (Single Margin)
One side metallization OPP film with Aluminum (Two-margin)
Internal multiple series with one side metallization OPP film with Zinc-Aluminum
Segmented metallized film A:Diamond Pattern B:T- Pattern C:1/2 T- Pattern

Inside/outside core diameter

Inside core diameter/Tolerance		Outside core diameter/Tolerance
75mm	+1/-0.5mm	220 280 320	±20mm ±20mm ±20mm
Note: A pair tolerance of outside core diameter ≤2mm.

Specifications of metallized film
(MPP Film):

Properties	Unit	Typical value
Density	g/cm³	0.905±0.005
Thickness	µm	2.0 ~ 12
Tensile Strength	MD (MPa)	≥100
Elongation at Break	MD (%)	20~200
Elastic Modulus	MD (MPa)	2800
Heat Shrinkage	MD (%)	≤5 ( 120°C, 10min)
Wetting Tension	mN/m	38 (Corona treated side)
Surface Roughness	µm	0.08
Melting Point	ºC	172
Volume Resistivity	Ω.m	>10¹⁵
Break-dowm Voltage	V/µm	≥350 ( 23°C, DC )
Dielectric Constant		2.2 (20ºC,1KHz)
Dissipation Factor		≤4×10^-4 (20ºC,1KHz )
RC	ΩF	≥5×10⁴

(MPET Film):

Properties	Unit	Typical value
Density	g/cm³	1.4
Thickness	µm	<5	5~12	≥12
Tensile Strength	MD (MPa)	≥84	≥108	≥120
Elongation at Break	MD (%)	≥22	≥33	≥44
Elastic Modulus	MD (MPa)	3500
Break-dowm Voltage	V/µm	≥200 ( 23°C, DC )	≥250 ( 23°C, DC )
Heat Shrinkage	MD (%)	≤2.5 ( 150°C, 10min)
Surface Roughness	µm	0.095
Melting Point	ºC	256
Volume Resistivity	Ω.m	>10¹⁵ ( 23°C, Humidity 50%)
Dielectric Constant		3.2 (20ºC,1KHz)
Dissipation Factor	-	≤60×10^-4 (20ºC,1KHz )
RC	ΩF	≥1×10⁴

Company

COMPANY Anhui Safe Electronics Co., Ltd. was founded in February 2007, specializing in the production, research and development of metallized film for capacitor use.
The company is located in Shizishan National High Technology Industrial Development Zone, Tongling City. The company now has 164 staffs.

Packing
1)Film rolls are packed in plastic bags, vacuumed and put into desiccant for heat sealing.
2)The Bags are marked with type labels, mark thickness width, free margin width and resistance.
3)The bags are packed in carton cases.
4)The cartons are wrapped by wooden cases or reinforced carton.

Storage
Metallized film should be stored in its original package with temperature 5 - 35ºC and humidity less than 85%RH before using.
Metallized layer is easily oxidized when exposure to moisture. Therefore, the film should be used as soon as possible when opened.
The recommended temperature is 15 -25ºC with humidity less than 60%RH after opening.
With original sealed package, and stored as mentioned above, the storage time can be as following:
Al metallized film: 12 months from the delivery date.
Al/Zn Alloy metallized film: As zinc is quite unstable , the storage period (from delivery date) depends on the resistance of the film:
≤10 Ω/: 6 months
10 ~30Ω/: 3 months
>30Ω/: 1month

Certification

Q&A

Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer specialized in metallized film for capacitor use and metallized film capacitors since 2007. We enjoy great reputation among our customers not only for competitive price, qualified products but also for excellent service.

Q2: How is your product quality?
A2: We strictly executive ISO9001 quality management system certification, and our products won CQC, TUV, VDE performance certification and SGS report.

Q3: How can I get some samples?
A3: We are honored to offer you samples if you need! The little sample cost can be free, the large quantity samples,can be negotiable.

Details determine success of failure

Forward

Related products

Zinc-Aluminum with Ramp Resistance One Side Metallizion OPP Film Metallized Film for Capacitor Use 2-12um

US$ 5.98 ~ 10

2um~12um One Side Metallization OPP Film Qith Zinc-Aluminum with Ramp Resistance

US$ 5 ~ 10

Metallized Film for Capacitor Use Thickness 2um ~12um

US$ 5 ~ 10

Metallized Film 2-12um Zn-Al BOPP Film Base Film PP/Pet for Capacitor Use Metallized Polyester Safe Electronics Plastic Film Capacitor Appliaction

US$ 5.98 ~ 10