Complaint
6 inch PDC diamond drill bit Matrix body PDC bit for water dri
Steel is metallurgically opposite of matrix. It is capable of withstanding high impact loads, but is relatively soft and, without protective features, would quickly fail by abrasion and erosion. Quality steels are essentially homogeneous with structural limits that rarely surprise their users.
Product Features
Steel PDC bit with five blades of parabola crown profile and with middle cutter density
With interchangeable screw nozzles.
Asymmetrical blades arrangement and unique load-balanced cutter arrangement design improve bit stability and therefore higher ROP
Non-plane interfaced diamond /carbide cutters effectively absorb high stress and minimize cutter fracturing and wearing.
Both tilted and cauterized nozzles design improves bit cleaning and prevents bit balling, thus improving ROP
Can be used on rotary or downhole motor drilling
Suitable for soft to medium complex formation
High HIS is recommended
In order to quote, please give the following specifications:
1. Size of the bit
2. IADC code
3. Thread connection
4. Body Material
| Basic Specification | |
| Number of Blades | 6 |
| Primary Cutter Size | 16mm |
| Nozzle Qty. | 7NZ |
| Gauge Length | 2.2 Inch |
| Operating Parameters | |
| RPM (r/min) | 60~300 |
| WOB(KN) | 20~110 |
| Flow Rate (lps) | 22~35 |
| Application | Medium-hard to hard formations with low compressive strength, such as hard shale, limestone, sandstone, dolomite, hard gypsum, marble, etc. |
| Features | TheS166 is a steel body PDC bit with 6 curved blade with back-reaming and spiral gauge protection. Optimized Hydraulic design and enhanced cleaning and cooling effects of the bits to prevent the bit from balling. |
