ISO8 Professional Portable Modular Cleanroom, Interlock Door Cleanroom

Min.Order: 1

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 150 ~ 200

Description

Clean room Introduction:
Cleanrooms are essential to any manufacturing process where particulate contamination can affect the quality of goods produced.
Specific clean room classifications and ISO class code descriptions provide protective guidelines and secure environments
through controlled air filtration, which lowers the possibility of product contamination or large particulate interference within
critical process manufacturing. Specific cleanroom requirements and ISO 14644-1 cleanroom standards are used to protect
consumers from any potential flaw or mishandling of a product.

Clean rank of suspended particles in air of clean room or clean area
ISO rank for air cleanness	Bigger or equal to maximum concentration limits in table (P/m3-air)
ISO rank for air cleanness	0.1um	0.2um	0.3um	0.5um	1um	5um	American federal 209E rank for cleanness
ISOClass1
ISOClass2	100	24	10	4
ISOClass3	1000	237	102	35	8		1
ISOClass4	10000	2370	1020	352	83		10
ISOClass5	100000	23700	10200	3520	832	29	100
ISOClass6	1000000	237000	102000	35200	8320	293	1000
ISOClass7				352000	83200	2930	10000
ISOClass8				3520000	832000	29300	100000
ISOClass9				35200000	8320000	293000	300000

Cleanroom HAVC System:

Cleanroom HVAC designs involve knowledge of regulations, a general term for indoor environmental comfort, which creates
cleaness level guidelines, airflow, room pressurization, indoor air quality (air change per hour, CFM, temperature control, humidity
control etc).
When it comes to cleanrooms, HVAC means a lot more than comfort. In addition to comfort, cleanroom HVACs differentiate
themselves from conventional systems with their increased air supply, airflow patterns, use of high efficiency filters and room
pressurization. Air exchanging rate with cleanroom is many times more than conventional spaces.
Except for certain special circumstances, the temperature of medical instrument cleanrooms should be calibrated between 18~28ºC,
with a relatively humidity of 45-65%. If you find that you are out of range for these standards, consider which instruments in the clean
room may be acting as a heat source.

Wall Panel	Thickness - 50mm, double color painted hot-dipping galvanized steel sheet, 0.5mm thick PE coated steel sheet, 0,8mm thick GI frame, infill with rock wool, comply with accessories below in item Height: 2600mm.
Wall Panel accessories	Aluminum joint profiles
	Top track (aluminum slot), 305030mm
	Adjustable floor track
	Straight corners
	R50 round corner inside
	3-way connector inside (per pc)
	middle type 3-way connector outside
	door seal (per pair)
Ceiling panels	Thickness - 50mm, double layer color painted hot-dipping galvanized steel sheet, 0.5mm thick PE coated steel sheet, 0.8mm thick GI frame, infill with rock wool, with single glass magnesium oxide boards for reinforcement.
Ceiling Panel accessories	Aluminum joint profiles
	Aluminum Grid
	Hanging bar, with expansion bolts, T screw, square regulator, connector, nuts
Clean room Doors	Steel doors: 50mm thickness; 1.0 mm double-side electro galvanized steel sheet, with paper honeycomb inside; Including 50mm thick door leaf, 50mm thick steel frame, hinge, GEZE lock, Auto-down bottom seal, with double 5mm tempered glass window (round or rectangular window), not include door closer.
	Single leaf, size 1000*2100mm
	Double leaf, size 1900*2100mm
	Door Closer, Brand: GEZE 1000C
Interlock	Electronic interlock to control two or more doors, with electromagnetic lock, light Indicator and main control box
Interlock	2 Doors
Windows	Double tempered glass view window, joints filled with silicon sealant, with vapor absorption, 5mm thick glass
	Size: 1200100050mm
	Size: 1500100050mm
Silicone	Dow corning silicone
PVC conduits	PVC conduit (25mm) inside wall panels
Opening cost	Openings in ceiling/wall panels