1 | A high voltage power supply is a high precision, high stability high voltage power supply with positive or negative polarity output in a range of sizes, with output voltages from 0 to 130KV and maximum output power of 10000W. |
2 | The output voltage and current values are displayed on a digital meter on the panel for easy operation. The output voltage can be continuously and linearly adjusted by the user via the potentiometer knob. |
3 | The power supply is protected against over-voltage, over-current, arc pull, and short circuits. |
4 | The power supply has a metal casing with a good electrical shielding effect. |
1 | Electrostatic Separation | 12 | Electrostatic Spraying |
2 | Capillary Electrophoresis | 13 | Electrostatic Flocking |
3 | Electrostatic Dust Removal | 14 | Old Refining Equipment |
4 | Pressure Resistance Testing | 15 | Electrostatic Spinning |
5 | High-Pressure Bias | 16 | High-Pressure Deburring |
6 | High-Pressure Ignition | 17 | Material Sorting |
7 | Metal Vaporization | 18 | Electric Explosion |
8 | Air Purification | 19 | Water Purification |
9 | Electron Beam | 20 | Medical Sterilization |
10 | Communication And Transportation | 21 | Scientific Research |
11 | National Defense | 22 | |
..... |
1 | High stability, high accuracy, and small size. |
2 | Continuous linear adjustment of the output voltage. |
3 | Adjustment of the local control potentiometer. |
4 | Protection functions for over-voltage, over-current, arc pulling, and short-circuit. |
5 | Start and stop function |
6 | Low EMI, high anti-interference capability |
Power supply models | / |
Output voltage range | 0~+130KVDC &0~-130KVDC |
Rated output current | 1mA |
Ripple noise | ≤1% |
Voltage regulation rate | ≤0.1% |
Load Adjustment Rate | ≤0.5% |
Technical specification | Specification indicator |
Input voltage | AC90V~AC264V,47Hz~63Hz |
Output voltage | See "List of typical high voltage power supplies" for details, customized to suit customer requirements |
Output current | |
Output power | ≤300W |
Ripple voltage | ≤0.5% |
Voltage regulation rate | Less than 0.1% within the maximum permissible range of input voltage for a given load |
Load Adjustment Rate | Input voltage constant, load from no-load to rated, less than 0.5% |
Time-drifting | ≤0.1%/h (after 30 minutes of power operation) |
Warm float | ≤0.1%/ºC |
This control | The output voltage can be set between 0V and the maximum voltage by adjusting the multi-turn potentiometer. |
Start/stop function | Controls the start and stop of the power supply; when the switch is "pressed", the power supply is activated |
Grounding method | AC isolated, reference ground to earth |
Protection method | Flow limiting type |
Operating temperature range | 0ºC~+50ºC |
Storage temperature range | -25ºC~+75ºC |
Net Weight | 3.0KG |
Housing material | Aluminium |
Dimension | L300*W260*H45(MM) |
1 | Place the power supply on a horizontal surface for use. |
2 | Ensure that the power supply is reliably earthed before use. |
3 | Please keep the output of the power supply at a certain insulating distance from the surrounding components to avoid discharge. |
4 | To ensure reliable operation of the product without overheating and high temperatures, blocking and covering the ventilation holes and keeping away from heat sources are strictly prohibited. |
5 | The use of the power supply should be avoided in dusty or humid environments, otherwise, the insulation will be reduced and partial discharge will occur. |
5 | It is strictly forbidden to disassemble and repair the high-voltage power supply to avoid personal injury and economic loss caused by high-voltage power supply failure. |
6 | It is strictly forbidden to operate or repair the internal circuit of the high-voltage power supply with electricity, as dangerous or even fatal voltages can be generated inside the power supply. |
7 | Do not touch the high voltage connectors unless the load and the capacitors inside the power supply have been completely discharged after switching off the high voltage power supply. |
8 | It is strictly forbidden to insert other objects into the ventilation holes of the equipment to avoid accidental contact with the circuit, short-circuiting, causing fire or electric shock. |
1KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL1-10 | 1KV | 10mA | 10W |
#2 | IPS-ATDWSDL1-30 | 1KV | 30mA | 30W |
#3 | IPS-ATDWSDL1-60 | 1KV | 60mA | 60W |
#4 | IPS-ATDWSDL1-100 | 1KV | 100mA | 100W |
#5 | IPS-ATDWSDL1-150 | 1KV | 150mA | 150W |
#6 | IPS-ATDWSDL1-300 | 1KV | 300mA | 300W |
#7 | IPS-ATDWSDL1-600 | 1KV | 600mA | 600W |
#8 | IPS-ATDWSDL1-1200 | 1KV | 1200mA | 1200W |
2KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL2-5 | 2KV | 5mA | 10W |
#2 | IPS-ATDWSDL2-15 | 2KV | 15mA | 30W |
#3 | IPS-ATDWSDL2-30 | 2KV | 30mA | 60W |
#4 | IPS-ATDWSDL2-50 | 2KV | 50mA | 100W |
#5 | IPS-ATDWSDL2-75 | 2KV | 75mA | 150W |
#6 | IPS-ATDWSDL2-150 | 2KV | 150mA | 300W |
#7 | IPS-ATDWSDL2-300 | 2KV | 300mA | 600W |
#8 | IPS-ATDWSDL2-600 | 2KV | 600mA | 1200W |
3KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL3-3.33 | 3KV | 3.33mA | 10W |
#2 | IPS-ATDWSDL3-10 | 3KV | 10mA | 30W |
#3 | IPS-ATDWSDL3-20 | 3KV | 20mA | 60W |
#4 | IPS-ATDWSDL3-33.3 | 3KV | 33.3mA | 100W |
#5 | IPS-ATDWSDL3-50 | 3KV | 50mA | 150W |
#6 | IPS-ATDWSDL3-100 | 3KV | 100mA | 300W |
#7 | IPS-ATDWSDL3-200 | 3KV | 200mA | 600W |
#8 | IPS-ATDWSDL3-400 | 3KV | 400mA | 1200W |
6KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL6-1.67 | 6KV | 1.67mA | 10W |
#2 | IPS-ATDWSDL6-5 | 6KV | 5mA | 30W |
#3 | IPS-ATDWSDL6-10 | 6KV | 10mA | 60W |
#4 | IPS-ATDWSDL6-16.7 | 6KV | 16.7mA | 100W |
#5 | IPS-ATDWSDL6-25 | 6KV | 25mA | 150W |
#6 | IPS-ATDWSDL6-50 | 6KV | 50mA | 300W |
#7 | IPS-ATDWSDL6-100 | 6KV | 100mA | 600W |
#8 | IPS-ATDWSDL6-200 | 6KV | 200mA | 1200W |
8KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL8-1.25 | 8KV | 1.25mA | 10W |
#2 | IPS-ATDWSDL8-3.75 | 8KV | 3.75mA | 30W |
#3 | IPS-ATDWSDL8-7.5 | 8KV | 7.5mA | 60W |
#4 | IPS-ATDWSDL8-12.5 | 8KV | 12.5mA | 100W |
#5 | IPS-ATDWSDL8-18.8 | 8KV | 18.8mA | 150W |
#6 | IPS-ATDWSDL8-37.5 | 8KV | 37.5mA | 300W |
#7 | IPS-ATDWSDL8-75 | 8KV | 75mA | 600W |
#8 | IPS-ATDWSDL8-150 | 8KV | 150mA | 1200W |
10KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL10-1 | 10KV | 1mA | 10W |
#2 | IPS-ATDWSDL10-3 | 10KV | 3mA | 30W |
#3 | IPS-ATDWSDL10-6 | 10KV | 6mA | 60W |
#4 | IPS-ATDWSDL10-10 | 10KV | 10mA | 100W |
#5 | IPS-ATDWSDL10-15 | 10KV | 15mA | 150W |
#6 | IPS-ATDWSDL10-30 | 10KV | 30mA | 300W |
#7 | IPS-ATDWSDL10-60 | 10KV | 60mA | 600W |
#8 | IPS-ATDWSDL10-120 | 10KV | 120mA | 1200W |
15KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL15-0.67 | 15KV | 0.67mA | 10W |
#2 | IPS-ATDWSDL15-2 | 15KV | 2mA | 30W |
#3 | IPS-ATDWSDL15-4 | 15KV | 4mA | 60W |
#4 | IPS-ATDWSDL15-6.67 | 15KV | 6.67mA | 100W |
#5 | IPS-ATDWSDL15-10 | 15KV | 10mA | 150W |
#6 | IPS-ATDWSDL15-20 | 15KV | 20mA | 300W |
#7 | IPS-ATDWSDL15-40 | 15KV | 40mA | 600W |
#8 | IPS-ATDWSDL15-80 | 15KV | 80mA | 1200W |
20KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL20-0.5 | 20KV | 0.5mA | 10W |
#2 | IPS-ATDWSDL20-1.5 | 20KV | 1.5mA | 30W |
#3 | IPS-ATDWSDL20-3 | 20KV | 3mA | 60W |
#4 | IPS-ATDWSDL20-5 | 20KV | 5mA | 100W |
#5 | IPS-ATDWSDL20-7.5 | 20KV | 7.5mA | 150W |
#6 | IPS-ATDWSDL20-15 | 20KV | 15mA | 300W |
#7 | IPS-ATDWSDL20-30 | 20KV | 30mA | 600W |
#8 | IPS-ATDWSDL20-60 | 20KV | 60mA | 1200W |
30KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL30-0.33 | 30KV | 0.33mA | 10W |
#2 | IPS-ATDWSDL30-1 | 30KV | 1mA | 30W |
#3 | IPS-ATDWSDL30-2 | 30KV | 2mA | 60W |
#4 | IPS-ATDWSDL30-3.33 | 30KV | 3.33mA | 100W |
#5 | IPS-ATDWSDL30-5 | 30KV | 5mA | 150W |
#6 | IPS-ATDWSDL30-10 | 30KV | 10mA | 300W |
#7 | IPS-ATDWSDL30-20 | 30KV | 20mA | 600W |
#8 | IPS-ATDWSDL30-40 | 30KV | 40mA | 1200W |
40KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL40-0.25 | 40KV | 0.25mA | 10W |
#2 | IPS-ATDWSDL40-0.75 | 40KV | 0.75mA | 30W |
#3 | IPS-ATDWSDL40-1.5 | 40KV | 1.5mA | 60W |
#4 | IPS-ATDWSDL40-2.5 | 40KV | 2.5mA | 100W |
#5 | IPS-ATDWSDL40-3.75 | 40KV | 3.75mA | 150W |
#6 | IPS-ATDWSDL40-7.5 | 40KV | 7.5mA | 300W |
#7 | IPS-ATDWSDL40-15 | 40KV | 15mA | 600W |
#8 | IPS-ATDWSDL40-30 | 40KV | 30mA | 1200W |
50KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL50-0.6 | 50KV | 0.6mA | 30W |
#2 | IPS-ATDWSDL50-1.2 | 50KV | 1.2mA | 60W |
#3 | IPS-ATDWSDL50-2 | 50KV | 2mA | 100W |
#4 | IPS-ATDWSDL50-3 | 50KV | 3mA | 150W |
#5 | IPS-ATDWSDL50-6 | 50KV | 6mA | 300W |
#6 | IPS-ATDWSDL50-12 | 50KV | 12mA | 600W |
#7 | IPS-ATDWSDL50-24 | 50KV | 24mA | 1200W |
60KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL60-0.17 | 60KV | 0.17mA | 10W |
#2 | IPS-ATDWSDL60-0.5 | 60KV | 0.5A | 30W |
#3 | IPS-ATDWSDL60-1 | 60KV | 1mA | 60W |
#4 | IPS-ATDWSDL60-1.67 | 60KV | 1.67mA | 100W |
#5 | IPS-ATDWSDL60-2.5 | 60KV | 2.5mA | 150W |
#6 | IPS-ATDWSDL60-5 | 60KV | 5mA | 300W |
#7 | IPS-ATDWSDL60-10 | 60KV | 10mA | 600W |
#8 | IPS-ATDWSDL60-20 | 60KV | 20mA | 1200W |
70KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL70-0.14 | 70KV | 0.14mA | 10W |
#2 | IPS-ATDWSDL70-0.43 | 70KV | 0.43mA | 30W |
#3 | IPS-ATDWSDL70-0.85 | 70KV | 0.85mA | 60W |
#4 | IPS-ATDWSDL70-1.43 | 70KV | 1.4.3mA | 100W |
#5 | IPS-ATDWSDL70-2.14 | 70KV | 2.14mA | 150W |
#6 | IPS-ATDWSDL70-4.29 | 70KV | 4.29mA | 300W |
#7 | IPS-ATDWSDL70-8.57 | 70KV | 8.57mA | 600W |
#8 | IPS-ATDWSDL70-17.1 | 70KV | 17.1mA | 1200W |
80KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL80-0.13 | 80KV | 0.13mA | 10W |
#2 | IPS-ATDWSDL80-0.38 | 80KV | 0.38mA | 30W |
#3 | IPS-ATDWSDL80-0.75 | 80KV | 0.75mA | 60W |
#4 | IPS-ATDWSDL80-1.25 | 80KV | 1.25mA | 100W |
#5 | IPS-ATDWSDL80-1.88 | 80KV | 1.88mA | 150W |
#6 | IPS-ATDWSDL80-3.75 | 80KV | 3.75mA | 300W |
#7 | IPS-ATDWSDL80-7.5 | 80KV | 7.5mA | 600W |
#8 | IPS-ATDWSDL80-15 | 80KV | 15mA | 1200W |
100KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL100-0.1 | 100KV | 0.1mA | 10W |
#2 | IPS-ATDWSDL100-0.3 | 100KV | 0.3mA | 30W |
#3 | IPS-ATDWSDL100-0.6 | 100KV | 0.6mA | 60W |
#4 | IPS-ATDWSDL100-1 | 100KV | 1mA | 100W |
#5 | IPS-ATDWSDL100-1.5 | 100KV | 1.5mA | 150W |
#6 | IPS-ATDWSDL100-3 | 100KV | 3mA | 300W |
#7 | IPS-ATDWSDL100-6 | 100KV | 6mA | 600W |
#8 | IPS-ATDWSDL100-12 | 100KV | 12mA | 1200W |
120KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL120-0.08 | 120KV | 0.05mA | 10W |
#2 | IPS-ATDWSDL120-0.25 | 120KV | 0.25mA | 30W |
#3 | IPS-ATDWSDL120-0.5 | 120KV | 0.5mA | 60W |
#4 | IPS-ATDWSDL120-0.83 | 120KV | 0.83mA | 100W |
#5 | IPS-ATDWSDL120-1.25 | 120KV | 1.25mA | 150W |
#6 | IPS-ATDWSDL120-2.5 | 120KV | 2.5mA | 300W |
#7 | IPS-ATDWSDL120-5 | 120KV | 5mA | 600W |
#8 | IPS-ATDWSDL120-10 | 120KV | 10mA | 1200W |
130KV | ||||
NO | Model | Output voltage(KV) | Output Current(mA) | Output Capacity(W) |
#1 | IPS-ATDWSDL130-0.23 | 130KV | 0.23mA | 30W |
#2 | IPS-ATDWSDL130-0.46 | 130KV | 0.46mA | 60W |
#3 | IPS-ATDWSDL130-0.77 | 130KV | 0.77mA | 100W |
#4 | IPS-ATDWSDL130-1.15 | 130KV | 1.15mA | 150W |
#5 | IPS-ATDWSDL130-2.31 | 130KV | 2.31mA | 300W |
#6 | IPS-ATDWSDL130-4.6 | 130KV | 4.6mA | 600W |
#7 | IPS-ATDWSDL130-9.2 | 130KV | 9.2mA | 1200W |
Model Parameter | 1000V600MA | 1200V500MA | 1500V400MA | 2000V300MA | |
Rating | Voltage (null load) | 10~1000V | 10~1200V | 150~1500V | 200~2000V |
Current | 0~600mA | 0~500mA | 0~400mA | 0~300mA | |
Over voltage protection | 0~1100V | 0~1320V | 0~1650V | 0~2200V | |
Set resolution | Over voltage | 0.1V | 0.1V | 0.1V | 0.1V |
Voltage | 0.1V | 0.1V | 0.1V | 0.1V | |
Current | 0.1mA | 0.1mA | 0.1mA | 0.1mA | |
Display resolution | Voltage | 0.1V | 0.1V | 0.1V | 0.1V |
Current | 0.1mA | 0.1mA | 0.1mA | 0.1mA | |
Display value accuracy | Voltage | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB |
Current | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Load regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Power regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Ripple (RMS) | Voltage | ≤0.5‰ | ≤0.5‰ | ≤0.5‰ | ≤1‰ |
Size | 520MM (LENGTH) *482MM (WIDTH) *88MM (HEIGHT) |
Model Parameter | 3000V200MA | 4000V150MA | 5000V120MA | 6000V100MA | |
Rating | Voltage (null load) | 300~3000V | 400~4000V | 500~5000V | 600~6000V |
Current | 0~200mA | 0~150mA | 0~120mA | 0~100mA | |
Over voltage protection | 0~3300V | 0~4400V | 0~5500V | 0~6600V | |
Set resolution | Over voltage | 1V | 1V | 1V | 1V |
Voltage | 1V | 1V | 1V | 1V | |
Current | 0.01mA | 0.01mA | 0.01mA | 0.01mA | |
Display resolution | Voltage | 1V | 1V | 1V | 1V |
Current | 0.01mA | 0.01mA | 0.01mA | 0.01mA | |
Display value accuracy | Voltage | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB |
Current | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Load regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Power regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Ripple (RMS) | Voltage | ≤1‰ | ≤1‰ | ≤1‰ | ≤1‰ |
Size | 520mm (Length) *482mm (Width) *88mm (Height) |
Model Parameter | 8000V750MA | 10000V60MA | 12000V50MA | ||
Rating | Voltage (null load) | 800~8000V | 1000~10KV | 1200~12KV | |
Current | 0~75mA | 0~60mA | 0~50mA | ||
Over voltage protection | 0~8800V | 0~11KV | 0~13.2KV | ||
Set resolution | Over voltage | 1V | 1V | 1V | |
Voltage | 1V | 1V | 1V | ||
Current | 0.01mA | 0.01mA | 0.01mA | ||
Display resolution | Voltage | 1V | 1V | 1V | |
Current | 0.01mA | 0.01mA | 0.01mA | ||
Display value accuracy | Voltage | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB | |
Current | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ||
Load regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ||
Power regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ||
Ripple (RMS) | Voltage | ≤1‰ | ≤1‰ | ≤1‰ | |
Size | 520mm (Length)*482mm (Width) * 88mm (Height) |
MODEL PARAMETER | 1000V1200MA | 1200V1000MA | 1500V800MA | 2000V600MA | |
Rating | Voltage (null load) | 10~1000V | 10~1200V | 150~1500V | 200~2000V |
Current | 0~1200mA | 0~1000mA | 0~800mA | 0~600mA | |
Over voltage protection | 0~1100V | 0~1320V | 0~1650V | 0~2200V | |
Set resolution | Over voltage | 0.1V | 0.1V | 0.1V | 0.1V |
Voltage | 0.1V | 0.1V | 0.1V | 0.1V | |
Current | 0.1mA | 0.1mA | 0.1mA | 0.1mA | |
Display resolution | Voltage | 0.1V | 0.1V | 0.1V | 0.1V |
Current | 0.1mA | 0.1mA | 0.1mA | 0.1mA | |
Display value accuracy | Voltage | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB |
Current | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Load regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Power regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Ripple (RMS) | Voltage | ≤0.5‰ | ≤0.5‰ | ≤0.5‰ | ≤1‰ |
size | 520mm (length)*482mm (width)*88mm (height) |
Model Parameter | 3000V400MA | 4000V300MA | 5000V240MA | 6000V200MA | |
Rating | Voltage (null load) | 300~3000V | 400~4000V | 500~5000V | 600~6000V |
Current | 0~400mA | 0~300mA | 0~240mA | 0~200mA | |
Over voltage protection | 0~3300V | 0~4400V | 0~5500V | 0~6600V | |
Set resolution | Over voltage | 1V | 1V | 1V | 1V |
Voltage | 1V | 1V | 1V | 1V | |
Current | 0.1mA | 0.1mA | 0.1mA | 0.01mA | |
Display resolution | Voltage | 1V | 1V | 1V | 1V |
Current | 0.1mA | 0.1mA | 0.1mA | 0.01mA | |
Display value accuracy | Voltage | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB |
Current | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Load regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Power regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | |
Ripple (RMS) | Voltage | ≤1‰ | ≤1‰ | ≤1‰ | ≤1‰ |
size | 520mm (length)*482mm (width) *88mm (height) |
Model Parameter | 8000V150MA | 10000V120MA | 12000V100MA | ||
Rating | Voltage (null load) | 800~8000V | 1000~10KV | 1200~12KV | |
Current | 0~150mA | 0~120mA | 0~100mA | ||
Overvoltage protection | 0~8800V | 0~11KV | 0~13.2KV | ||
Set resolution | Overvoltage | 1V | 1V | 1V | |
Voltage | 1V | 1V | 1V | ||
Current | 0.01mA | 0.01mA | 0.01mA | ||
Display resolution | Voltage | 1V | 1V | 1V | |
Current | 0.01mA | 0.01mA | 0.01mA | ||
Display value accuracy | Voltage | ≤0.1%+2LSB | ≤0.1%+2LSB | ≤0.1%+2LSB | |
Current | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | ||
Load regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ||
Power regulation rate | Voltage | ≤0.5%+2LSB | ≤0.5%+2LSB | ≤0.5%+2LSB | |
Current | ≤1%+2LSB | ≤1%+2LSB | ≤1%+2LSB | ||
Ripple (RMS) | Voltage | ≤1‰ | ≤1‰ | ≤1‰ | |
SIZE | 520MM (LENGTH)*482MM (WIDTH)*88MM (HEIGHT) |