Pressure Sensor Compact Size Piezoresistive 0-10bar-1000bar Dia. 12.6mm

Pressure sensor compact size piezoresistive 0-10bar-1000bar dia. 12.6mm

The compact Size Piezoresistive Pressure Sensor is, a newly developed sensor that benefits from smaller capsule dimensions (Φ12.6mm) and crevice free diaphragms. It uses a high-sensitivity piezoresistive silicon die as sensing component, which is protected against ambient influences by SS316 housing sealed with a concentrically corrugated diaphragm. Inside the housing, the filled silicone oil assures the measured pressure can be
transmitted onto silicon die and then transform the pressure to electric signal.

Its workable pressure range from 10bar to 100 bar.

Application	Key features
Industrial process control Level measurement Gas, liquid pressure measurement Pressure checking meter Pressure calibrator Liquid pressure system and switch Cooling equipment & A/C system Aviation and navigation inspection Pneumatics and hydraulics systems	• Pressure range 0-1MPa-100MPa • Gauge, Absolute, Sealed gauge • Constant Current: 1.5mA • Voltage power supply: 5V/10V • Isolated construction, measure various media • Full Stainless Steel 316 • Wide temperature compensation -10ºC~80ºC • Long-term stability ±0.1%FS/year

 

Construction performance	Electric & Environment Performance
Diaphragm: Stainless Steel 316L Housing: Stainless Steel 316L Pressure leading tube: Stainless Steel 316L O Ring: Φ12*1.8mm (nitrile rubber or viton) Measuring Medium: Which is compatible with SS316L, viton, nitrile rubber Packing Medium: Silicon Oil Net weight: 25g	Power supply: 1.5mA/5V(optional) (Max input voltage is 10VDC) Insulation Resistance: 500MΩ@500VDC Overpressure: 1.5~3 times FS Vibration (20~500Hz): 20G Useful Time (25ºC): >1*100 Million Times @Pressure Circulation(80%FS) Response Time: ≤1ms Storage Temp.: -40~+125ºC Operating Temp.: -40~+85ºC Compensation Temp.: 0~50ºC; -10~80ºC @ 0~70(7KPa,20 KPa,35 KPa

Technical parameters

Parameters	Type	Max.	Unit
Non-linearity	0.2	0.5	%FS
Hysteresis	0.05	0.1	%FS
Repeatability	0.05	0.1	%FS
Zero output	+/-1	+/-2	mV DC
FS output	100		mV DC
Input/Output impedance	2.6	3.8	k Ω
Zero Temp. Drift*	+/- 0.15	+/- 0.8	%FS,@25ºC
Sensitivity Temp. drift*	+/-0.2	+/-0.7	%FS,@25ºC
Long-term stability	0.1		%FS/year

Remarks: Range -100KPa~100MPa; *The typical value of 0~10KPa and 0~20KPa's zero; temperature drift and sensitivity temperature drift is 0.4%FS@25ºC, max value is 1.6%FS@25ºC

Standard range

Range	Overload	Output/F.S (mV)	Typical value(mV)	Pressure type
0~10KPa	300%	35~60	45	G
0~20KPa	300%	70~110	90	G/A
0~35KPa	300%	55~80	70	G/A/D
0~70KPa	300%	55~80	60	G/A/D
0~100KPa	300%	60~85	75	G/A/D
0~200KPa	300%	60~85	75	G/A/D
0~400KPa	300%	60~80	70	G/A/D
0~600KPa	200%	90~120	100	G/A/D
0~1.0MPa	200%	125~185	150	G/A/D
0~1.6MPa	200%	80~120	100	G/A/D
0~2.0MPa	200%	50~70	60	G/A/D
0~3.5MPa	200%	100~120	110	G/A/D
0~7.0MPa	200%	120~150	135	G/A
0~10MPa	200%	180~230	200	G/A
0~25MPa	150%	140~170	150	S
0~40MPa	150%	230~280	250	S
0~60MPa	150%	100~160	130	S
0~100MPa	150%	100~150	120	S

Notes: G for Gauge pressure; A for Absolute pressure; D for Differential pressure; S for Sealed gauge.

Drawing & wiring diagram

Dimensions

Wiring diagram

Overall

Model selections
Note: 1. Extremely attention must be paid to sensor installation process to avoid any miss conduction that affect the sensor performance,
2. please protect the diaphragm and the compensated board carefully to prevent any damage. 3.  Please contact us if your requested working
temperature lower than -20ºC