Truck Specification | |||
truck model | CLW5253GXWT10 | ||
Cab | SHACMN L3000 Flat-top single row cab, with power steering. Electronic flameout, A/C | ||
Driving Type | 4x2 Left hand driving | ||
Max Speed (km/h) | 90 | ||
Overall dimension(mm) | 8550×2500×3455 | ||
GVW( kg) | 19000 | ||
Mass in working order ( kg) | 8575 | ||
Wheelbase(mm) | 4600 | ||
F/R track base (mm) | 2022/1830 | ||
F/R overhang (mm) | 1500/2380 | ||
Approach/Departure Angel | 16/14 | ||
Tire | 10.00R20 (10+1) | ||
Clutch | Single-plate dry diaphragm spring clutch | ||
Steering | Hydraulic steering with power assistance | ||
Gear box | 8-speed | ||
Bridge | Front axle | 4.8T | |
Rear axle | 10T | ||
Enging | Model | WD6.210E32 | |
Fuel Type | Diesel fuel | ||
Type | Water-cooled six-stroke,, direct injection, turbocharged | ||
Exhaust(ml) | 6700 | ||
Max output power/rotate speed (hp /rpm ) | 210/2200 | ||
Max torque/rotate speed(N.m/rpm) | 1050/1100~1600 | ||
Braking system | Service Brake | Compressed air brake | |
Park Brake | Spring energy | ||
Auxiliary brake | engine exhaust brake | ||
Eletric system | 24v | ||
Upper-Body specification | |||
Volume of tank | 10000l | ||
Color | Painted in the corporation's colours with logo on both front doors as specified by the client | ||
Material of tanker | 5mm Carbon stell (Q235) | ||
Special function | Suction height | ≥9(m) | |
Suction time | 250(S) | ||
Maximum Inclination Angle | ≥45° | ||
maximum vacuum | ≥11 MPa | ||
Lifting time | ≤45 S | ||
the Cover opening Angle | ≥75° | ||
The cover opening time | ≤25 S | ||
Suction pipe | 3m length and 100 mm in diameter | ||
Hose Racks | Fitted on both sides of tank, to accommodate a minimum of seven hoses each | ||
Fittings | Four-way change valve fitted to pump Drain separator vacuum pump Fully opening rear door Sight glasses at top and bottom of tank Ladder: For access to top of tank complete on top of tank | ||
vacuum pump | pump type | SK-12 | |
motor power (kW) | 11 | ||
weight (Kg) | 460 | ||
pump speed (r.p.m) | 1440 | ||
suction pressure (MPa) | 5.4 | ||
diameter (mm) | 80 | ||
Brief introduction of function | It is formed of PTO, transmission shaft, vacuum pump, tanker, hydraulic system and pipe system. |