Complaint
Description:
CPE150A is an high performance but economic 5.8G outdoor CPE/Wi-Fi Bridge with long transmission distance, strong wall-pass-through ability and high anti-interference features. Comply with IEEE802.11a/n standard, 5.8GHz, 300Mbps data rate, Atheros chipset, provide stable PTP/PTMP connection. What's more, with 14dBi high gain antenna, the Wi-Fi distance more than 1500 meters.
CPE150A support AP, Wi-Fi Repeater operation mode, simple to change the operation mode by switch on device, then establish PTP, PTMP connection by LED display and reset button, no need access into GUI. What's more, it support Power over Ethernet, 24V passive PoE, with LED display to show signal strength, easy to find a suitable installation point, save much human work and cost.
Besides that, it support enterprise security like WPA, WPA2, and 802.1x RADIUS, then AC controller central management and maintenance, make this device safely work in CCTV, Village long range data transmit, Park, Squares...
Main Features:
ABS waterproof, dust proof and sunscreen shell, temperature adaptive and board protective .
CPE150A with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -30ºC to 55ºC. Suit for any country.
300Mbps high speed, Atheros industrial chipset, wider application
CPE150A comply with IEEE 802.11a/n standard, 300Mbps high speed, with Atheros industrial solution, it is a Wi-Fi bridge with low power consumption, strong security, widely be used in voice, video, data transmission in long range wireless monitor industrial.
14dBi High Gain Antenna, Long Range Wi-Fi Device in market.
CPE150A with 14dBi high gain antenna, the Wi-Fi range is more than 1500 meters, it is the device with very stable performance in long range, but competitive in price.
Support Power over Ethernet, Cost Save
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost, with 24V PoE, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Easy configure and install, remote control
CPE150A with operation mode change switch on device, work with AC controller management, greatly helpful in central management and remote maintenance, save much human work and cost, provide more efficient service for your networking.
Spec:
| Standard | IEEE 802.11a/n |
| Chipset | Atheros AR9344 |
| Flash | 8MB |
| DDR | 64MB |
| Frequency | 5150~5850MHz |
| Data Rate | 300Mbps |
| Operation Mode | AP, Repeater |
| RF Output Power | < 21dBm |
| Antenna | 14dBi MIMO Panel antenna |
| Interface | 1 * 10/100M RJ-45 WAN Port, 24V PoE support |
| 1 * 10/100M RJ-45 LAN Port, 24V PoE support | |
| 1 * Reset Button, press 1 second, work with slid switch to change the operation mode; Press 10 seconds, the device will revert to factory default settings. | |
| 1 * DC Jack, 12V/1A | |
| 1 * Slid Switch to change the operation mode, H mean host, AP mode; C mean client, Repeater mode | |
| PoE | 24V/0.5A |
| Max Power Consumption | < 8W |
| LED Light | Power, Wi-Fi, WAN, LAN, Signal Strength |
| ESD- I | Contact discharge: ±6KV, Air discharge:±15KV |
| Surge- I | Common mode :±4KV Different mode: ±2KV |
| Water-Proof Level | IP65 |
| Size(mm) | 237mm*79.1mm*56.1mm |
| Working Temperature | -30°C ~ 55°C |
| Storage Temperature | -40°C ~ 70°C |
| Humidity | 5% ~ 95% (Non-condensing) |
| Operation Mode | AP mode |
| Repeater mode | |
| Functions | SSID broadcast |
| Multi SSID up to 4 | |
| Hide SSID | |
| Security: OPEN, WPA, WPA2, WPA-PSK, WPA2-PSK, 802.1x Radius | |
| MAC Fliter: Support white-list(64) | |
| Wireless bridge, PTP/PTMP | |
| WiFi on-time disable | |
| Multicast acceleration | |
| User Isolation: Wireless network isolation, AP isolation | |
| Support RF power adjustable based on environment. | |
| User quantity access limited | |
| Networking | VLAN tag |
| DHCP server | |
| Cloud access | |
| Management | Backup the configuration information |
| Reset to default settings | |
| Immediately reboot or reboot on time | |
| Firmware upgrade | |
| Time management includes system display time and time synchronization | |
| System Log | |
| Support GUI access and Local AC controller management | |
| Accessory | 24V/0.5A PoE Adapter for Passive PoE Device |
| Install Accessory | |
| LAN Cable | |
| User Manual |
