Complaint
| Products Description |
| Wedge wire mesh also called wedge wire screen, is mainly made of stainless steel. And wedge wire products include wedge wire nozzle, cylinder, support grid and lateral assemblies. The size of the pores on the one side is smaller than the pores on the other side, so the wedge wire can greatly filter something from the small pore side to the large pore side without clogging. Featured by high mechanical strength and filtering efficiency, it is popular for filtering and screening, and widely used in mining, coal, petroleum, fertilizer, grain and environmental protection industries. |
Material | SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc |
External diameter | 20-300mm |
Standard | Non-standard, OEM, ODM |
Specification | Easy leakage, wear resistance, corrosion resistance. The mesh cross section is a trapezoid, narrow width of the gap, have a wire made of cold rolled stainless steel, this wire is support rods. The screen is uniform, the welding is stable, high hole rate, long service life, high strength, stiffness and bearing capacity of rigid, screening filter device can be made into various shapes. |
Application | The product is especially suitable for waxy oil, asphalt, diesel, beer, and high viscosity oil. It is widely used in electric power industry, natural gas well, petrochemical industry,chemical industry, mining, paper making, environmental protection, metallurgy, food, sand control, Coarse filtration and fine filtration engineering for water treatment in industries such as decoration. |
| Products Details |
Surface profiles | Support profiles | Min.diam. in mm | Min. slot width in mm |
10S | Q25 | 21 | 0.1 |
11S | Q20 or Q25 | 23 | 0.03 |
12S | 22S | 30 | 0.05 |
12S | Q25 | 23 | 0.03 |
12S | Q35 | 30 | 0.05 |
18S | 22S or Q35 | 30 | 0.05 |
18S | Q25 | 25 | 0.03 |
18S | D45 | 300 | 0.2 |
18S | 10x3 | 300 | 0.2 |
22S | 22S or Q35 | 45 | 0.1 |
22S | D45 or 10x3 or 25x3 | 300 | 0.2 |
28S | Q35 | 215 | 0.2 |
28S | D45 or 10x3 or 25x3 | 300 | 0.2 |
34S | Q35 | 300 | 0.2 |
34S | D45 | 300 | 0.2 |
34S | 10x3 or 25x3 | 300 | 0.2 |
42S | Q35 or D45 | 300 | 0.2 |
42S | 10x3 or 25x3 | 300 | 0.2 |
Outside diameter in mm | Number of support profiles |
30 | 8 |
45 | 10 |
57 | 12 |
70 | 18 |
85 | 18 |
97 | 20 |
110 | 24 |
137 | 30 |
164 | 36 |
215 | 48 |
268 | 48 |
305 | 40 |
380 | 48 |
460 | 60 |
510 | 64 |
625 | 80 |
914 | 180 |
| Product Display |
| Product Application |
| Product packaging |
