GC High Precision Ring Frame Spare Parts Textile Steel Rings/Ring Cup
TONGDA ring cup products range too many services: Plat and Cone, use high quality C20 steel, alloy steel, titanium alloy steel, Chromium manganese, bearing steel and other materials with high precision, and could be plain surface, chrome coated, crystal etc., so that we can meet all the customer' requirements.
Our products are available for cotton yarn, flax yarn and different blends in all counts nos. produced by ring frames.
Our enterprise has strong technology, advanced production equipment imported from Japan and Germany, International standard manufacturing techniques and modernized production lines, and advance inspection instruments, complete inspection standard.
Main Technical Data:
| Cone Ring Flange |
| Model | Specification | Inner
Dia
(d) | Bottom
Dia
(d) | Hem
Width
(b) | H | Yarn Count | Traveller
Type |
| BC6 | 3847 | 38 | 47 | 3.1 | 10
(8) | Cotton, chemical fiber and blended blow 60 British teams | BC6
PG12 |
| 3553 | 35 | 51 |
| 3554 | 35 | 54 |
| 3854 | 38 | 54 |
| 3851 | 38 | 51 |
| 4251 | 42 | 51 |
| 4254 | 42 | 54 |
| 4554 | 45 | 54 |
| BC9 | 3854 | 38 | 54 | 2.5 | Cotton, chemical fiber and blended above 30 British teams | BC9 |
| 4054 | 40 | 54 |
| 4254 | 42 | 54 |
| 4554 | 45 | 54 |
| Flat Ring Flange |
| Type | Flange Width
(b) | Inner Dia.
(d) | Fitting Dia.
(d) | H | Yarn Count | Traveller Type |
| PG1/2-3547 | 2.6 | 35 | 47 | 8
10 | 32s
and
over
32s | OSS
RSS
CO |
| PG1/2-3551 | 51 |
| PG1/2-3554 | 54 |
| PG1/2-3847 | 38 | 47 |
| PG1/2-3851 | 51 |
| PG1/2-3854 | 54 |
| PG1/2-4251 | 42 | 51 |
| PG1/2-4254 | 54 |
| PG1-3544 | 3.2 | 35 | 44 | 18-42s
cotton
45s cotton/
polyester
blended | FO
BFO
6802
6903
9803
GS
BK
FU
BU
BSD |
| PG1-3547 | 47 |
| PG1-3551 | 51 |
| PG1-3554 | 54 |
| PG1-3847 | 38 | 47 |
| PG1-3551 | 51 |
| PG1-3854 | 54 |
| PG-42502 | 40 | 50.5 |
| PG1-4051 | 51 |
| PG1-4054 | 54 |
| PG1-4251 | 42 | 51 |
| PG1-4254 | 54 |
| PG-4260 | 60 |
| PG1-4554 | | 54 |
| PG-4560 | 45 | 60 |
| PG-4757 | 47 | 57 |
| PG-5160 | 51 | 60 |
| PG2-4554 | 4 | 45 | 54 | 6-10s cotton | G GO |
Detailed Specification:
Advantage:
1.With excellent bearing materials and advanced techniques in heat treatment, we can get the micro-hardness about HV830 to 850 at any point from its surface to heart. It also has compact and refined Martensitics structure.
2.It has admirable abrasion resistance, its life can reach 3 to 5 years, can keep the quality of yarn stable chronically.
3.With Superior performance, it can obviously reduce the filo plume, decrease end breakage, heighten quality of yarn and spinning efficiency.
4.It endows with good anti-wedge can make spinning channels freely, equal and stable tensile force and obviously reduce the breakage.
5.Its surface is very smooth, has short running-in period, can reduce yam feather, can heighten quality of the yarn.
6.It can be widely used on spinning, with strong practicality.
Other Related Model:
Ring qualitative classification:
1.C20 steel series
2.Bearing steel series
3.Alloy steel series
4.Chromium manganese titanium steel series.
Surface treatment classification of bearing steel:
A.Smooth surface polishing treatment
B.Electric plating process
C.Nano processing
D.Self-lubricating treatment
E.The composite processing
Flat Ring Cup:
1.By using high-tech with propriectual property rights, ring traveler works stable in orbit, and good performance in anti-wedge; yarn channel in spacious; inside is deep, neck wall is thin, and it will not wedge ring traveller, no tarnsilient tension occur.
2.Use advanced imported or domestic equipment to process steel ring track.
3.By using special curved mirror track surface process steel and advance surface treatment process, the track has stable friction co-efficient, to form long term lubrication channel of ring traveller.
4.Import of domestic high-quality steel ,the used of advanced processing technology, formed the gain size of rem micro-structure, hardness acuity 81.5HRA work place, General service life to the traditional ring life is 3~5 times, and keep the yarn quality long-term stability;
5.Products are suitable for yarn cotton, chemical fiber, or cotton and chemical fiber blended and high, medium and low count yarn products.
6.Yarn has a good performance ,and breakage and feather reducing decrease significantly; it's not only can meet the high-speed spinning of high medium, and low count yarn requirements, but also can adapt to the yarn that has tight spinning; it is an ideal alternative to similar imported products.
Cone Ring Cup:
1.By using high-tech with propriectual property rights, ring traveler works stable in orbit, and good performance in anti-wedge; yarn channel in spacious; inside is deep, neck wall is thin, and it will not wedge ring traveller, no transilient tension occur.
2.Use advanced imported or domestic equipment to process steel ring track.
3.By using special curved mirror track surface process steel and advance surface treatment process, the track has stable friction co-efficient, to form long term lubrication channel of ring traveller.
4.Import of domestic high-quality steel ,the used of advanced processing technology, formed the gain size of rem micro-structure, hardness acuity 81.5HRA work place, General service life to the traditional ring life is 3~5 times, and keep the yarn quality long-term stability and yarn quality.
5.Yarn has a good performance ,and breakage and feather reducing decrease significantly; it's not only can meet the high-speed spinning of high medium, and low count yarn requirements, but also can adapt to the yarn that has tight spinning; it is an ideal alternative to similar imported product.
The Cautions of Using Ring Cup:
The bearing steel ring had been rust-protection and lubrication process It only needs clean soft cloth to wipe clean. It is strictly prohibited to wipe and clean with water or gasoline organic solution.
It is strictly prohibited to use the metal tool striking the bearing steel ring directly during the installing adjustment process, and ensure the bearing steel ring be handed with care and prevent conllide. Adjust the center of bearing steel ring, soindle and guidewire to the same center. The distance between triangle and top of yarn tubes hold to be adjusted to your company's regulated height to ensure consistency.
New ring computer run timeliness, choose lighter than normal spinning 1 ~ 2 traveler, a after work, a new traveller, turn into normal use.
The non-operative bearing steel ring should deposit in the environment whose relative humidity is below 40%,which will avoid rust because of damp.
HJ(Alloy) Series Traveller:
1.It endows with strong tenacity. Its shape is not easy to be transformed. It can always preserve optimal matching effects for steel ring.
2.It harden Martensitic structure is even and compact, its wear resistance is obviously boost up.
3.It Obviously improve the quality of yarn and heighten efficiency of spinning.
4.It service-life is two to three times than that of normal traveller, if it further treated by special coating, its service-life will be more longer, it can be comparable with imported traveller.
HYSS(Ultrathin Section) Traveller:
1.It's shape is ultrathin section, it can increase touched area between steel ring and traveller, cool off fastly, also can reduce abrasion.
2.The shape of this kind of traveller is very scientific and rational. Its median point is very low, it also had good performance in anti-wedge.
3.The running of HYSS traveller is very stable, can obviously reduce the filoplume.it make yarn levelness uniformity and heighten the quality of yarn and spinning effectiveness.
4.It have good resistance to wear and longer service life. If we make some special coating treatment on it, its service life can be prolong about one and a half.
5. It can completely meet the requirement for spinning high count yarn.
NM Sulfuration Traveller:
1.It can heighten self-lubricating function on its surface and reduce the friction coefficient.
2.It can reduce yarn breakage and filoplume, save power and labor, in order to improve the quality of yarn and reduce producing cost.
3.It endows good performance in anti-rust and resistance to corrotaion.,so it has longer service life.
HYB Series Ring Traveller:
1.Unique design for its shape optimize the property of suitable for spinning of yarn path.
2.It is made of superior(imported) alloy steel material, to assure the toughness, flexibility and consistency of organization.
3.Adopt advanced polishing unit and polishing technology and decrease the frictional coefficient.
4.It can be used on PG1 series steel ring for spinning various yarn, it also can spin various fiber, to meet the high spindle speed.
5.Reasonable hardness and compact metallurgical structure, can prolong its service life.
Packing and Shipping:
FAQ:
(1) Q: How's the after-sale service?
A: We offer engineers available to service overseas under merchandiser's supervision and translation.
(2) Q: Are you available for on-the-spot invitation?
A: We do welcome our new and old friends come here to have a visitation. Besides, we would send you our exposition and relative information to promote a face-to-face meeting if you'd like to.
(3) Q: Is the price offered changeable?
A: We offer reasonable price for every client, and the price is changeable according to purchasing amount.
(4) Q: How about the quality?
A: The main subassembly and raw materials are all supplied by large companies. Key parts are research and developed by our own staff. Professional assembly line work and strict quality test system can ensure your high quality requirement.
(5) Q: Are you a manufacturer or Trade Company?
A: We are a professional manufacturer holding our own International Trade Department, for that we can better understand customer's needs and offer a reasonable price.
Why Choose Our Company?
A: History: TONGDA Textile Machinery Group was establish in 1952. Now have more than 65 years old history
B: Main Products: TONGDA Group specializes in design, manufacturing, and marketing of a wide range of Textile machinery, it has seven branch companies, mainly produces ring spinning frame, roving frame, weaving machine (water Jet loom/Air jet loom/rapier Loom), warping machine, quilting machine and nonwoven machine.
C: We provide design for complete line of spinning mill for cotton yarn, polyester yarn, wool yarn, flax/linen yarn, machines including blow room, carding machine, draw frame, roving frame, ring frame, winding machine, open end spinning machine and the air conditioning system and waste collection system for spinning mill.
We also provide workshop layout design and trench design, and air pipe layout design.
D: Product /Quality Guarantee: 1 year warranty for the International standard.
E: After Sale Service: We are work online 24 hours. If you have any questions about our machine you can contact us.
F: One-stop Service:
We have R&D department including more than 100 engineers which are improving and enlarging our supply range.
Export Memorabilia:
TONGDA 1988: TONGDA's 500 sets ring spinning machines was exported to Bangladesh.
TONGDA 1993: TONGDA's 385 sets spinning machines was exported to Pakistan.
TONGDA 1995: TONGDA's 229 sets spinning machines was exported to Bangladesh.
TONGDA 2002: Delivery 300 sets spinning machines to India.
TONGDA 2009: TONGDA's 100 sets water jet loom and air jet loom was exported to India.
TONGDA 2010: TONGDA once again exported 300 sets water jet loom and air jet loom to India.
TONGDA 2011: TONGDA exported needle punching nonwoven machine production line to south America and exported more than 500 sets water jet loom, air jet loom, rapier loom to overseas.
TONGDA 2012: TONGDA exported 200 sets spinning machine and 100 sets rapier loom to Tajikistan and once again exported 200 sets ring spinning machines to India.
TONGDA 2013: TONGDA exported 500 sets weaving machines to overseas and 50 sets nonwoven machines, 680 sets spinning machines to overseas including South Asia and Africa.
TONGDA 2015: TONGDA sold more than 1000 sets weaving machines, 100 sets nonwoven machines and 700 sets spinning machines to overseas including Europe, South America, and South-East Asia.
Certification:
TONGDA is an ISO9001, ISO14001, and ISO13485 company. The products are designed to meet the technical standards of 3C and CE. All the products are certified by the Industry Administration Authority. TONGDA will continue to strive to be a stronger leader in the global market of Cotton machinery and Spinning machinery.
Exhibition:
Welcome to inquiry:
Complaint
