Midea water-cooled screw chiller is a classic product that operates on a flooded type evaporator and high efficiency compressor. Optimized system design and enhanced heatexchange efficiency mean the unit works best under both full load and partial load.
Power supply
380V-3Ph-50Hz
Cooling Capacity
100RT-500RT
Power input
59.74kw-304.9kw
COP
5.638-5.788kw/kw
IPLV
6.516-7.299kw/kw
Refrigerant type
R134a
Product Advantages
1.AHRI Certified
2.Enclosed Motor Design The motor is set at the compressor gas inlet,and the adopted efrigernt cooling method works together with the unique inlet flow path design to ensure full cooling of the motor.The motor does not send out heat to the equipment room,so the heat ispation of the chller does not need to be considered for ventilation of the equipment room. The compessor motor adopts large capacity design,and the motor directly drives the rotor to achieve very high eflciency.
3.New Condenser
4.Accurate Cooling Capacity Control The unit features an electronic expansion valve and orifce plate to control the refrigerant for the evaporator and the water temperature accurately. The electronic expansion valve is from a leadng International brand. It Is characterized by quick response, rapld regulation, and a large capacitv adiust ranoe.
5.Quiet Operation The sound level is as low as 65 dB(A) when the unit operates with a partal load. A standard shock-absorbing cushion is confgured between the compressor foot and the metal support, achieving a good damping effect. The built-in discharge mufher for the compressor cuts off transmission from the sound source.