Description
X19 Piezoresistive Silicon Pressure Sensor
Features:Small rangeconstant current excitationImported highly reliable pressure dieTemperature compensationNormalized output availableCompensation board filled with glue for protection against moistureΦ19 mm standard OEMAll 316L materialHigh performance, all solid, high reliability18 months warranty periodApplications:Industrial process control systems
Pressure calibration instruments
Refrigeration equipment and HVAC control
Gas pressure measurement
Biomedical instruments
Pressure measuring instrument
Product overview:X19 Industrial Pressure Sensor is the core component for the manufacture of pressure sensors and pressure transmitters. As high-performance
pressure sensitive component, X19 can be easily amplified and assembled into the pressure transmitters with standard signal output.X19 packages diffused silicon pressure sensitive die to 316L stainless steel housing. The external pressure is applied directly to the sensor chip,
and the back of the sensor chip is compressed to form an all-solid structure for pressure measurement, so the product can only be used to measure clean,non-corrosive gases, or liquids. | Electrical performance parameters |
| Pressure range | -10kPa~10kPa |
| Pressure reference | Gauge pressure |
| Excitation | 1.5mA |
| Input impedance | 2kΩ~5kΩ |
| Electrical connection | Silicon soft wire |
| Compensated temp. | 0ºC~50ºC |
| Operating temp. | -20ºC~85ºC |
| Storage temp. | -20ºC~85ºC |
| Insulation resistance | ≥200MΩ/250VDC |
| Response time | ≤1ms (up to 90%FS) |
| Measured medium | Clean and non-corrosive gas |
| Mechanical vibration | 20g(20~5000Hz) |
| Shock | 100g/10ms |
| Durability | 106 pressure cycles |
| Structural performance parameters |
| Housing material | 316L |
| Sealing O-ring | NBR |
| Basic parameters |
| Item | Condition | Min | Nominal | Max | Unit | Note |
| Non-linearity | | -2.0 | ±1 | 2.0 | %FS | Note (1) |
| Hysteresis | | -0.05 | ±0.03 | 0.05 | %FS | |
| Repeatability | | -0.05 | ±0.03 | 0.05 | %FS | |
| Zero output | | -2 | ±1 | 2 | mV | |
| Full scale span output | ≤2kPa
other | 10
30 | | 30
100 | mV | Excitation 1.5mA |
| Zero temp. coefficient | | -2 | ±1.5 | +2 | %FS | Note (2) |
| Span temp. coefficient | | -1.5 | ±0.75 | 1.5 | %FS | Note (2) |
| Thermal hysteresis | | -0.075 | ±0.05 | 0.075 | %FS | Note (3) |
| Long term stability | | -0.3 | ±0.2 | 0.3 | %FS/Year | |
Note:- Calculate according to BFSL least square method.
- In the compensated temperature range, 0ºC~50ºC, reference temperature 30 ºC.
- After passing high and low temperature, return to the reference temperature.
| Structure and electrical connection (in mm) |
| Pressure range selection |
| Code | Pressure range | Overload pressure | Burst pressure | O-ring |
| 250Pa | 0~250Pa | 150%FS | 200%FS | NBR |
| 1k | 0~1kPa | 150%FS | 300%FS | NBR |
| 2k | 0~2kPa | 150%FS | 300%FS | NBR |
| 5k | 0~5kPa | 150%FS | 300%FS | NBR |
| 7k | 0~7kPa | 150%FS | 300%FS | NBR |
| 10k | 0~10kPa | 150%FS | 300%FS | NBR |
| ±1k | -1kPa~1kPa | 150%FS | 300%FS | NBR |
| ±2k | -2kPa~2kPa | 150%FS | 300%FS | NBR |
| ±3k | -3kPa~3kPa | 150%FS | 300%FS | NBR |
| ±10k | -10kPa~10kPa | 150%FS | 300%FS | NBR |
Note: The temperature endurance of NBR O-ring is -40ºC~120ºC. When the operating temperature of the sensitive element is below -40ºC or the sensitive
element is used in harsh media, please contact the company.
About US: Exhibitions:Certifications:
FAQ:1. Q: Are you manufacturer or trading company? A: We are manufacturer which focuses on pressure sensor for 33 years.2. Q: What international certificates do you have? A: ISO9001, CE, RoHS Certificated.3. Q: What is your production capacity? A: We produced 1500000 pieces pressure sensor in year 2017.4. Q: What is the lead time of your product? A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization. Note: lead time may vary base on different products. Please contact us for detailed lead time. 5. Q: What is the warranty of your products? A: Our warranty time is 18 months after shipment.6. Q: Do you provide customized products? A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Complaint
