En 136 Full Face Masks Flame Resistance Testing Equipment

Introduction:

- Full Face Masks Flame Resistance Tester Burning Testing Equipment is mainly composed of a jacket and bib composition may also wear fire-protective helmets, fire-protective boots, and fire-protective gloves!

- Each set must be fitted a serial number of check marks with strong national fire equipment quality inspection center is to be manufactured

- Full Face Masks Flame Resistance Tester Burning Testing Equipment is designed and produced according to GA 124-2013 and GB/T16556-2007 latest version of the standard development; meets the standard tool for back, back with a belt buckle, bottle protective cover, and full face shield barrier combustion performance test; the instrument is intelligent, touch-screen control system; the freedom to choose different samples of test procedures; and test results are automatically saved.

• EN 136: Respiratory protective devices - Full face masks - Requirements, testing, marking

• GA 124-2013 latest version of the standard requirements

Test section:

• Burning test private metal mold

1, Six inlet combustion nozzles to control propane flow and airflow.

2, Burner nozzle height can be adjusted up and down; 250mm from the outer surface of the specimen;

3, Pressure gauge and regulator valve regulates the burner gas pressure in the range of 0 ~ 10kPa;

4, Gas automatic blocking device, which blocks gas supplies when the test is 5 seconds;

6, Automatic ignition, switches off automatically after 5s ignition.

• Back with strap test section:

1, Stainless steel baffle plate, appearance, and corrosion;

2, Imported Bunsen burner, gas, and airflow rate can be adjusted;

3, Torch lifting device; stainless steel sample holder;

4, Automatic timing;

5, Flame height is 40mm; the temperature at 20mm is 800 ± 50 ºC;

6, Automatic ignition, turns off automatically after 20s ignition.

Specification: