New Cat Grader and Prices 125HP 120K Motor Grader for Sale

Min.Order: 1

Product origin: Qingdao, Shandong, China

Infringement complaint:

Complaint

US$ 70000 ~ 100000

Description

New Cat Grader and Prices 125hp 120K Motor Grader for Sale

Technical Specifications

ENGINE
Base Power (1st Gear) - Net	93.0 kW
Engine Model	Cat C7 ACERT
Displacement	7.2 l
Bore	105.0 mm
Stroke	127.0 mm
High - Ambient Capability	50.0 °C
Base Power - Net	93.0 kW
Derating Altitude	3048.0 m
High Ambient - Fan Speed - Maximum	1575.0 r/min
Maximum Torque	774.0 N·m
Note (1)	Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Note (2)	Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3)	Maximum torque measured at 1,000 rpm in gears 4-8.
Speed at Rated Power	2000.0 r/min
Torque Rise	0.5
VHP Range - Net	108-118 kW (145-158 hp)
MOLDBOARD
Blade Width	3.7 m
Arc Radius	413.0 mm
Throat Clearance	58.0 mm
Cutting Edge Thickness	16.0 mm
Cutting Edge Width	152.0 mm
End Bit - Thickness	16.0 mm
End Bit - Width	152.0 mm
Moldboard - Height	610.0 mm
Moldboard - Thickness	22.0 mm
BLADE RANGE
Blade Tip Range - Backward	5°
Blade Tip Range - Forward	40°
Circle Centershift - Left	658.0 mm
Circle Centershift - Right	656.0 mm
Maximum Depth of Cut	775.0 mm
Maximum Lift Above Ground	410.0 mm
Maximum Shoulder Reach Outside of Tires - Left	1764.0 mm
Maximum Shoulder Reach Outside of Tires - Right	1928.0 mm
Moldboard Sideshift - Left	512.0 mm
Moldboard Sideshift - Right	663.0 mm
FRAME
Circle - Blade Beam Thickness	30.0 mm
Circle - Outer Diameter	1530.0 mm
Front Axle - Total Oscillation per Side	32°
Front Axle - Wheel Lean - Left/Right	18°
WEIGHTS
Gross Vehicle Weight - Typically Equipped	14340.0 kg
Gross Vehicle Weight - Base - Front Axle	3274.0 kg
Gross Vehicle Weight - Base - Rear Axle	9469.0 kg
Gross Vehicle Weight - Base - Total	12743.0 kg
Gross Vehicle Weight - Typically Equipped - Front Axle	4203.0 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle	10137.0 kg
Gross Vehicle Weight - Typically Equipped - Total	14340.0 kg
Operating Weight - Maximum - Front Axle	5197.0 kg
Operating Weight - Maximum - Rear Axle	11803.0 kg
Operating Weight - Maximum - Total	17000.0 kg
Note (1)	Base weight calculated on standard machine configuration with 13.0024 12PR (G2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator.
Note (2)	Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 13.0024 12PR (G2) tires, MP Rims, MMS, hydraulic tip, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator.

Detail Pictures

Product Description

PERFORMANCE

Cat C7 ACERT engine meets U.S. EPA Tier 3/EU Stage IIIA equivalent or Tier 2/Stage II equivalent emissions standards, depending on emission standards of specific country.
Power Shift Countershaft Transmission matched to engine, maximizing power to the ground.

EFFICIENCY

Electronic Throttle Control helps improve productivity by optimizing HP and torque to match the power demands of the application.
Aggressive blade angles, optimized moldboard curvature and large throat clearance allows material to roll more freely along blade, increasing efficiency.
Hydraulic demand fan automatically adjusts speed according to cooling requirements maximizing power to the ground and improving fuel efficiency.
Engine Idle Shutdown is available to shut down engine after a set period of time, decreasing fuel consumption which results in fewer emissions.

EASE OF OPERATION

Proportional Priority Pressure-Compensating (PPPC) provides load-sensing hydraulics with superior control, enhanced performance, and efficiency.
Optional Autoshift Transmission improves ease of operation and maximizes productivity by automatically shifting the transmission at optimal shift points.
Rocker and control switches are in easy reach.
Proven conventional controls provide industry-standard control pattern and feel for precise cutting edge movement.

SERVICEABILITY

Durable nylon composite wear inserts maximize circle torque and component life.
Sacrificial brass moldboard slide rail wear strips between blade mounting group and moldboard can be easily adjusted and replaced.
Left-side, ground level service area access speeds up maintenance and ensures that routine service is performed on time.

RELIABILITY

Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
Components are designed and manufactured to Caterpillar quality standards throughout all Caterpillar facilities.

COMFORT

Optional HVAC, defroster fan and sun shades keep you comfortable, while conveniently placed power ports keep additional communication devices charged and ready.

TECHNOLOGY

Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
Optional Cat Product Link™ aids your equipment management with remote monitoring capabilities.
AccuGrade Attachment Ready Option (ARO) can be ordered as a factory or dealer installed option making installation of the AccuGrade grade control system faster and easier.

SAFETY

Brakes located at each tandem wheel offer the largest total brake surface area in the industry, delivering dependable stopping power.
Standard circle drive slip clutch protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object.
Ground level engine shutoff allows anyone nearby to shut the machine down in case of an emergency.
Built-in lock check valves
Clear view to moldboard heel and tandem tires enhance productivity and safe operation.
Blade Lift Accumulators help absorb impact loads to the moldboard by allowing vertical blade travel.

Package and Shipping

Company Information

Forward

Related products