View Line 5L Bottle Blow Moulding Machine

Min.Order: 1

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 30000

Description

PS-70
The blow moulding machine PS-70 used for producing toys, bottles, jerry cans, kettles, milk tanks, etc, is double station with single die head, which is specially designed for 5L as maximum volume, suitable for HDPE, PE, PP, PVC, PETG and other materials for blow moulding. The productivity of 5L * 2 is higher than 250 PCS per hour.
Modiffied hydraulic system & reliable mechanical actions are the main traits of PS70D series.

TECHNICAL DATA
BASIC DATE

Materials:	PE,PP,PVC,PS,PC,EVA, etc
Capacity:	5L(MAX)*2
Output(dry cycle):	800X2PC/h
Total power:	41KW
Average energy consumption:	22KW

EXTRUSION UNIT
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 70mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: Japanese Toshiba converter instrument + Hard gear surface decelerator;
Drive power: 33KW;
Plasticizing capacity: 80Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 14.2KW;
Zones of heating: 3 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 3;

DIE HEAD SYSTEM
Central-incoming extruding die head;
According to the different plastic product, there is one series of die head for choice, such as double die (center distance: 160mm), Tetra-die (center distance: 85mm);
Mode of heating: Adopting heaters made of stainless steel;
Temperature controlling precision: Various in ± 1
Heating power: 5.7KW;
Temperature control: Automatic temperature control model such as Japan Mitsubishi Temperature controlling precision: Various in ± 1%;
Max annular diameter: 135mm;

CLAMPING UNIT
Single station with high-precision guide and large arm cylinder axle

Clamping force:	68KN (max)
Platen opening stroke:	150~500mm
Platen size:	320× 370mm
Max mould size(W× H):	350× 370mm/238× 600mm
Mould thickness:	153~300mm

CUTTING DEVOICE
High speed electrical heating cutter is equipped;

HYDRAULIC SYSTEM
The whole hydraulic system adopts Japanese YUKEN components and proportional controlling circle;
Import hydraulic valve, seal and proportional control;

ELECTRONIC CONTROLLING
U. S. A. AMERSON PLC + Taiwan HITECH LCD monitor + MITSUBISHI Automatic temperature control model + other electronic parts, such as LG\OMORON, etc;

ENERGY EQUIPMENT
Compress air: Pressure: 0.7Mpa, currency: 0.9m3/min;
Cold water required: Pressure: 0.2~0.3Mpa, currency: 60L/min;

ELECTRIC SOURCES according to the voltage condition in your factory;

MACHINE DEMENSION (L× W× H): 3.3× 2.3× 2.6(m);

TOTAL WEIGHT 5.5T

SPECIFICATIONS	UNITS	PS-70
Max container capacity	L	5L * 2
Number of die heads	Set	1
Machine dimension (LWH)	M	3.32.32.6
Total weight	Ton	5.5
CLAMPING UNIT
Clamping force	KN	68
Platen opening stroke	mm	150-500
Platen size	mm	320*370
Max mould size (W*H)	mm	350370/238600
Mould thickness	mm	153-300
POWER
Max drive	KW	33
Total power	KW	41
Fan power for screw	KW	0.14*3
Air pressure	Mpa	0.7
Air consumption	M³/min	0.9
Average energy consumption	KW	23
EXTRDER UNIT
Screw diameter	mm	70
Screw L/D ratio	L/D	24
Plasticizing capacity	Kg/hour	80
Number of heating zone	Zone	3
Extruder heating power	KW	14.2
Extruder driving power	KW	22
DIE HEAD
Number of heating zone	Zone	3
Power of die heating	KW	5.7
Max die pin diameter	mm	135
Center distance of double die	mm	160
Center distance of tetra-die	mm	85