Complaint
Competitive advantage of fuel tanker truck series
1 Applied carbon steel sheet Q235-A that in accordance with the international standard. Thickness is 5-10mm.
2 Apply the famous pump.
3 The main parts implements automatic welding, while the accessories apply carbon dioxide welding to ensure the tank in good performance.
4 Sub crossbeam apply rectangle steel sheet that thickness 5mm, stick out in one time.
5 Fire extinguisher replaced on the back of the truck for the emergency.
Painting held more tolerance and coherence, can make sure the tank in good situation within 5 years.
6 According to customer's needs:
A> The pump can be designed to pump in and out throw meter, or not through meter, self-flow through or not through meter.
B> The tank can be designed as a single compartment or several compartments.
C> You can choose to install heating pipes, insulation layer. The Insulation material is generally 50-100 mm thickness, insulation can be used rockwool, glasswool, polyurethane foam, aluminum silicate. The cladding can be used 1.8-2mm thick white (RAL9003) glass reinforced plastic, 1.2mm cold carbon steel, 1.00mm stainless steel sub-mirror or matter board.
D> At the end or side of tank, It can be installed 1-3 self-flow valve.
| Chassis | |||
| Vehicle model | 8000Liter HOWO 4*2 Fuel Tank Truck | ||
| Chassis model | ZZ1160 | ||
| Driving model | Left or Right hand drive | ||
| Overall dimensions | mm | 6995×2500×3200(mm) | |
| Cube Weight | 4150 | ||
| Payload | 7500 | ||
| Wheel base | mm | 3800 | |
| Exhaust/hp | ml/ps | 3225/88 | |
| Max speed | km/h | 90 | |
| Tire specification | 7.50R16 | Engine type | CY4102, 120hp |
| Traction system | 4*2 | Transmission | 6-speed with over drive |
| Number of axles | 2 | Axle Load(kg) | 2400/7200 |
| Engine | Chaochai ,diesel,6-cylinder in-line with water cooling | ||
| Tank Body | |||
| Shape | Mono block Cylinder | ||
| Total Volume(m3) | 10CBM | ||
| Tanker Body Material | 5mm carbon steel | ||
| End plate | 5mm carbon steel | ||
| Manhole cover | Aluminum manhole cover, ∮500mm ,1 set with 1 breather valve | ||
| Bottom Valve | 1 set | ||
| Discharging valve | 1 set ∮80mm discharging valve | ||
| Tire | 7.50R16 with one spare tire, total 7 pieces | ||
| Painting | Complete Chassis sand blasting to clean rust, 1 coat of anti-corrosive prime, 2 coats of final paint | ||
| Fire Distingwish | 2 sets | ||
| Accessories | One standard tool box | ||
For more information about FUEL REFUELING TRUCK PRODUCTS, please contact:
Krystal Zhang
Sales Manager
Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd.
Factory: NO.9, Jiliang Avenue, Suizhou Economic Development Zone,Suizhou, Hubei, China
Office: Room 1108, Eurasia Plaza, No.20 Jinyinhu Road, East- west lake District, Wuhan, Hubei, China.
Tel: +86-27-59215038; Fax: +86-27-59215082
Mob/: +86-15171412234
Web: csctruck.en.made-in-china.com
