Pipe range(OD) | Φ63-200mm |
Pipe length | 3-6m |
Socket type | R type(rubber ring) or U type(solvent) |
Socket method | R type: die tool expand with vacuum calibration U type: die tool insert |
Cooling method | Water cooling (can make air cooling according to request) |
Require cooling water pressure | 0.2~0.3Mpa |
Quantity of heating oven | 1 |
Heating method | Electric heating, by stainless steel heating rods |
Heating power | 20kw |
Total Power | 15kw |
highest temperature in heater | 280ºC |
Air pressure | 0.4~0.6Mpa |
Center height | 1000mm±50mm (or according to extruder) |
Machine set weight | About 1.8T |
Require oil label | 46# wear resistance hydraulic oil |