Model | WHL-25A/WHL-25AB | WP-25A/WP-25AB | ||
Cycle Mode | Natural convection | |||
Function | Temp. Range | RT+10-300ºC | RT+5-65ºC | |
Temp. Resolution Ratio | 0.1ºC | |||
Temp. Motion | ±1ºC | ±0.5ºC | ||
Temp. Uniformity | ±3.5% | ±2.0ºC | ||
Structure | Inner Chamber | B model: mirror stainless steel; without B model: High strength galvanized sheet | ||
Outer Shell | cold rolling steel electrostatic spraying exterior | |||
Insulation layer | compound silicate heat preservation board | |||
Heater | Nickel chromium alloy heating wire | |||
Power rating | 0.6kW | 0.18kW | ||
Exhaust hole | φ28mm top (with function of test hole) | |||
Controller | Temp. control mode | Two temperature section intelligent PID | ||
Temp. set mode | Touch button setting | |||
Temp. display mode | Measuring temperature: display on the four digital tubes upper row ;setting temperature: display on the lower row | |||
Timer | 0-9999min(with timing wait function) | |||
Operation function | fixed temperature operation, timing function, auto stop | |||
Additional function | Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory | |||
Sensor | K model | CU50 | ||
Safety device | over temperature sound-light alarm | |||
Specification | Inner Chamber size(W*L*H)(mm) | 260*260*260 | ||
Exterior size (W*L*H)(mm) | 380*455*568 | |||
Packing size (W*L*H)(mm) | 500*530*657 | |||
Volume | 18L | |||
Shelf number | 6 | |||
Load per rack | 15kg | |||
Shelf space | 29mm | |||
(50/60HZ)Current rating | AC220V/2.7A | AC220V/0.8A | ||
NW/GW (kg) | 27/35 | |||
Accessory | Shelf | 2 | ||
optional accessories | Shelf |