Programmable Thermal Shock Chamber Automated Thermal Stress System

Programmable Thermal Shock Chamber Automated Thermal Stress System

Two zone chamber has hot and cold zones that can be controlled independently.
Horizontal, three zone thermal shock chamber utilizes controlled areas for hot, ambient and cold temperatures.

About our company
Komeg Technology Co., LCD was found in 1990. In order to meet the requirement of the market, Komeg run a factory in 2002.

Hot and Cold Thermal Shock Testing Chamber
Mechanical structure:
1. The system meets the thermal cycling reliability test specifications (GJB150-2002, CNS, MIL, IEC, JIS);
2. Test samples are placed in the basket and then the motor drives control up-and-down of the basket to meet the purpose of testing the speciman in the cold and heat chamber;
3. Special design is adopted by thermal shock chamber to save space and get moderate operation altitude. So it is easy for maintenance of thermal shock chamber.
4. The insulating layer consists of anti-fire PU and high density fiber cotton to acquire best performance. In addition, the new design of D-series anti-sweat duct system is used to make the instrument more precise.
5. High load pulleys are installed in the bottom of the machine to facilitate the movement of the machine.
6. High-cold-resistant stainless steel has the ability of high tightness even in the serious temperature conditions.

Benifits more than you can get from other supplier
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties

Thermal shock test is a method of environmental testing that subjects a product to alternating extremes of high and low temperatures. Thermal shock testing allows for the observation of changes in product characteristics and failure occurrence caused by different materials and their thermal expansion coefficients. A thermal gradient difference in the different parts of the object expands by different amounts and can cause cracking and failure. KOMEG brand thermal shock and thermal stress chambers have been designed to operate in accordance with reliability programs, quality control, and commercial test programs and military test.

In order to better meet the requirement of the changeable market and the customer's diversity requirement, Komeg has moved into the national High-tech Park---Songshan Lake in Dongguan city. Based on innovation and integrity, Komeg will serve and return customer with new better service and excelent products under the brand of "Komeg" in the future.

Corporate Culture
Our Philosophy: Customer experience oriented, Create high quality products.
Our Vision: Become a respected and innovative industry leader
Our mission: Focusing on additional value for customers, creating opportunities for staff's development, dedicated to environmental protection and energy saving.
Our Values: Customers satisfaction, employee happiness, serving the society with fineness and precise.

After-sale service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

Technical Parameter:
 

2 Zone Thermal Shock Test Chamber IN THE BLANKET:
Specifications
Model		TST-A Series
		72A	130A	226A	360A	500A
Test weight(KG)		410	520	610	710	810
Interior size	W(mm)	560	670	770	830	710
	H(mm)	410	520	610	770	860
	D(mm)	300	410	510	610	710
Basket size	W(mm)	300	410	510	730	610
	H(mm)	300	410	510	510	730
	D(mm)	5	5	5	5	10
Low Temp. chamber		-55 °C~ -10°C
Pre-cooling time		+20 °C~ -55°C ,Within 60 min
Test. chamber		-40 °C~ +150°C
High Temp. chamber		+60 °C~ +200 °C
Pre-heating time		+60°C~ +200°C  ,Within 25 min
Recovery time		High-Temp Exposure 30 min
		Low-Temp Exposure 30 min
		Recovery time within 5 min
Safety device		within 10 seconds
Standard accessory		No fuse breaker, over pressure \ over heat and over current protection for compressor,   over temperature protection,  over load protection for blower, dry heat protection
Interior material		Cable port(portΦ50mm)*1,   shelves*2
Exterior material		Stainless steel plate ( SUS 304 )
Insulation material		Baked painting steel or stainless steel(SUS304)
Refrigeration system		Rigid polyurethane Foam glass fiber wool
		Water Cooled
Controller		Panel:7-inch LCD Touch panel , Chinese or English display selectable
		Operation model:Program or fix point running
		Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100                Humidity:pt-100 or  ~ 5V DCV
Ambient Temp.		+5 °C~ +35 °C (41 ~ 95°F)
Power		AC 380±10 %  50Hz ,3 phase 4 wires +Ground Wires
Note:1. We reserve the right to change specifications without prior notice  2. Customized sizes and configurations available

2 Zone Thermal Shock Test Chamber IN THE BLANKET:
Specifications
Model		TST B Series
		72B	130B	226B	360B	500B
Test weight(KG)		410	520	610	710	810
Interior size	W(mm)	560	670	770	830	710
	H(mm)	410	520	610	770	860
	D(mm)	300	410	510	610	710
Basket size	W(mm)	300	410	510	730	610
	H(mm)	300	410	510	510	730
	D(mm)	5	5	5	5	5
Low Temp. chamber		-70 °C~ -10°C
Pre-cooling time		+20°C~ -70 °C  ,Within 60 min
Test. chamber		-55°C~ +150°C
High Temp. chamber		+60 °C~ +200 °C
Pre-heating time		+60°C~ +200°C  ,Within 25 min
Recovery time		High-Temp Exposure 30 min
		Low-Temp Exposure 30 min
		Recovery time within 5 min
Safety device		within 10 seconds
Standard accessory		No fuse breaker, over pressure \ over heat and over current protection for compressor,       over temperature protection, over load protection for blower, dry heat protection
Interior material		Cable port(portΦ50mm)*1,   shelves*2
Exterior material		Stainless steel plate ( SUS 304 )
Insulation material		Baked painting steel or stainless steel(SUS304)
Refrigeration system		Rigid polyurethane Foam glass fiber wool
		Water Cooled
Controller		Panel:7-inch LCD Touch panel , Chinese or English display selectable
		Operation model:Program or fix point running
		Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100                Humidity:pt-100 or  ~ 5V DCV
Ambient Temp.		+5 °C~ +35 °C (41 ~ 95°F)
Power		AC 380±10 %  50Hz ,3 phase 4 wires +Ground Wires
Note:1. We reserve the right to change specifications without prior notice  2. Customized sizes and configurations available

 

2 Zone Thermal Shock Test Chamber IN THE BLANKET:
Specifications
Model		TST D Series
		72D	130D	226D	360D	500D
Test weight(KG)		410	520	610	710	810
Interior size	W(mm)	560	670	770	830	710
	H(mm)	410	520	610	770	860
	D(mm)	300	410	510	610	710
Basket size	W(mm)	300	410	510	730	610
	H(mm)	300	410	510	510	730
	D(mm)	5	5	5	5	10
Low Temp. chamber		-80 °C~ -10 °C
Pre-cooling time		+20 °C~ -80°C  ,Within 60 mins
Test. chamber		-60°C~ +150 °C
High Temp. chamber		+60 °C~ +200 °C
Pre-heating time		+60°C~ +200°C  ,Within 25 min
Recovery time		High-Temp Exposure 30 min
		Low-Temp Exposure 30 min
		Recovery time within 5 min
Safety device		within 10 seconds
Standard accessory		No fuse breaker, over pressure \ over heat and over current protection for compressor,      over temperature protection, over load protection for blower, dry heat protection
Interior material		Cable port(portΦ50mm)*1,   shelves*2
Exterior material		Stainless steel plate ( SUS 304 )
Insulation material		Baked painting steel or stainless steel(SUS304)
Refrigeration system		Rigid polyurethane Foam glass fiber wool
		Water Cooled
Controller		Panel:7-inch LCD Touch panel , Chinese or English display selectable
		Operation model:Program or fix point running
		Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100                Humidity:pt-100 or  ~ 5V DCV
Ambient Temp.		+5 °C~ +35 °C (41 ~ 95°F)
Power		AC 380±10 %  50Hz ,3 phase 4 wires +Ground Wires
Note:1. We reserve the right to change specifications without prior notice  2. Customized sizes and configurations available