Complaint
Oxygen is an indispensable gas for supporting life in the earth, special in the hospital, medical oxygen plays a very important role to saving the patients.
ETR PSA oxygen generator can produce medical level oxygen from the air directly, the produced oxygen can be delivered to the wards by the hospital pipelines, and then breathed by the patient with a humidification bottle. Compared with traditional bulk liquid oxygen and cylinders oxygen, ETR on-site PSA oxygen generator can reduce cost down to 50 percentages. They can produce oxygen by your will, overcoming the limits of distance, location and transportation. PSA oxygen generator is a more economical and efficient and convenient oxygen solution for hospitals, and it is widely used by more and more hospital.
Compressed air is purified through the air dryer and filters to a certain level for main generator to work with. Air buffer is incorporated for smooth supply of compressed air thus to reduce fluctuation of compressed air source. The generator produces oxygen with PSA (pressure swing adsorption) technology, which is a time proven oxygen generation method. Oxygen of desired purity at 93%±3% is delivered to oxygen buffer tank for smooth supply of product gas. Oxygen in buffer tank is maintained at 4bar pressure.
2.Technical Parameters For PSA Oxygen Generator Price
Inlet Pressurse :0.6Mpa | Output Pressure:0.35-0.45 Mpa |
Oxygen Purity:93+3% | Frequency:50Hz/60Hz |
Power:60W | Supply Voltage: AC220V |
Working Presure:6 Bar | Outlet Dew Point:-70 ºC-40 ºC |
3.Features for PSA Oxygen Generator Price
(a) ETR guarantees the proper functioning and operating of the Equipment for a period of 12 (Twelve) months from the date of testing and commissioning at the End User site, or 18 (Eighteen) months after delivery, whichever occurs first.
(b) If there be found any defects and malfunctioning during warranty period, ETR undertakes to make repairs of the Equipment at its own expenses including components and workmanship until they again function or operate properly.
5.Working Principles for PSA Oxygen Generator Price
The medical molecular sieve PSA oxygen generator system adopts the international advanced pressure swing adsorption (PSA) technology to form a rapid cycle of pressurization adsorption and depressurization desorption under the conditions of normal temperature and low pressure.
| ETO PSA Oxygen Generator | |||||||
| Item | Model | Capacity (Nm3/h) | Size (mm) L*W*H | Weight (KG) | Power (W) | Connector | |
| Air Inlet | Oxygen Outlet | ||||||
| 1 | ETO-03 | 2.5-3 | 760×750×1850 | 380 | 60 | DN15(G1/2") | DN15(G1/2") |
| 2 | ETO-05 | 3.5-5 | 760×750×2200 | 450 | 60 | DN15(G1/2") | DN15(G1/2") |
| 3 | ETO-10 | 5.5-10 | 880×780×2400 | 780 | 60 | DN20(G3/4") | DN15(G1/2") |
| 4 | ETO-15 | 10.5-15 | 1070×940×2500 | 1080 | 60 | DN25(G1") | DN20(G3/4") |
| 5 | ETO-20 | 15.5-20 | 1450×950×2500 | 1260 | 60 | DN32(G11/4") | DN20(G3/4") |
| 6 | ETO-25 | 20.5-25 | 1500×1000×2800 | 1480 | 60 | DN40(G11/2") | DN25(G1") |
| 7 | ETO-30 | 25.5-30 | 1500×1000×3000 | 1680 | 60 | DN40(G11/2") | DN25(G1") |
| 8 | ETR-35 | 30.5-35 | 1750×1200×3100 | 1950 | 60 | DN40(G11/2") | DN25(G1") |
| 9 | ETO-40 | 35.5-40 | 1750×1200×3150 | 2150 | 60 | DN40(G11/2") | DN25(G1") |
| Note: Customization is acceptable | |||||||
| Model ETO-15 Oxygen Generator | ||
| Item | Specification | Remark |
| Oxygen Capacity | 1-50Nm3/h | Normal/Standard Condition |
| Oxygen Purity | 93%±3% | |
| Oxygen Delivery Pressure | 0-4bar | Adjustable |
| Power Consumption | 0.1-0.2kW | 220V, 50Hz @1Phase |
| Dimensions (mm) | / | Including buffer tanks. Dimensions are approximate. |
| Weight (kg) | / | Weight is approximate. |
| Noise Level | ≤85dB(A) | 1 meter away |
| Compressed Air Specifications | ||
| Air Flow Rate Required | ≥3.0m3/min | Capacity Of The Clean & Dry Air after Pretreatment |
| Pressure | ≥7bar | Gauge |
| Oil residual Content | ≤0.008PPm | |
| Particles Size | ≤0.01m | |
| Pressure Dew Point | + 3ºC | |
| Air Temperature | 5-45 Deg. C | |
| Design Working Conditions | ||
| Relative humidity | 20%-100% | |
| Dust Content In The Air | ≤20mg/m3 | |
| H2S, SO2 Content In The Air | ≤5ppm | |
| CO2 Content In The Air | ≤250ppm | |
| CnHm Content In The Air | ≤20ppm | |
| Acidic Gases | Less Than Stimulus Content And Without Erosive Gases | Self-governed Room For Air Separation Plant And Far From Acidic Environment is Strongly Recommended |
Founded in 2003, Hunan ETR Electronic Medical Engineering Co., Ltd. has developed into a state-level high-tech enterprise. Consisting of top R&D team has developed four series of products over the past decade, ETR has successfully been listed on the NEEQ (National Equities Exchange and Quotations) with stock code of 839074 in 2016.
The Company has passed CE certification and the ISO quality management system certification, and gained a variety of certificates, including ISO9001 Quality Management System Certificate, ISO13485 Medical Device Quality Management System Certificate, ISO14001 Environmental Management Quality System Certificate
ETR products have been exported to Southeast Asia, Africa, the Middle East and other overseas markets. The after-sales service network covers more than 20 provinces and cities throughout the country, providing customers with after-sales services, quick response and other technical support services throughout the process.
ETR is committed to providing the users with top-quality products and services on the basis of orderly Marketing and after-sales service network.
Creating Products with Love
Building ETR Brand with Integrity
Fulfilling Dreams with Passion
1. Are you manufacturer or Trade Company?
We are the manufacturer of Oxygen Generator, founded in 2003.
2. What's the order oxygen generator process?
a. Inquiry---provide us all clear requirements.
b. Quotation---official quotation form with all clear specifications.
c. Printing file--- PDF, Ai, CDR, PSD, the picture resolution must be at least 300 dpi.
d. Contract confirmation---provide correct contract details.
e. Payment terms--- Negotiable.
f. Production---mass production
g. Shipping--- by sea, air or courier. Detailed picture of package will be provided.
h. Installation and commissioning
3.What terms of payment you use?
T/T, L/C etc.
4. How to get a prompt quotation of Oxygen generator?
When you send the inquiry to us, pls kindly send it with below technical information.
1) O2 flow rate: _____Nm3/hr( or How many cylinders do you want to fill per day(24hours))
2) O2 purity: _____%
3) O2 discharge pressure: _____Bar
4) Voltages and Frequency : ______V/PH/HZ
5) Application:
