Wear Resistant Conveyor Chute Ceramic Rubber Wear Liner Sheets Composite Plate Lining

Min.Order: 10

Product origin: Jiaozuo, Henan, China

Infringement complaint:

Complaint

US$ 10 ~ 100

Description

Wear Resistant Rubber Backed Ceramic Tiles Embedded Lining Pad Mat Liner

Why Choose Us:
1. Factory dedicates to ceramic wear liner, ceramic rubber composite liner
2. Extensive experience in production and exportation ceramic liner
3. Reliable factory, proven quality, resonable price
4. ISO9001:2015, 14001:2015, 45001:2018

Ceramic Rubber Wear Liner Description

Ceramic rubber composite liner, also called ceramic rubber pad, ceramic rubber wear plate, rubber ceramic lining, is compounded by rubber or polyurethane, alumina ceramic tiles and steel backing plate through hot vulcanizing process.
Cushioning rubber or polyurethane layer prevents ceramic tiles breakage.

Alumina Ceramic, 92% or 95% Al2O3
Available with square, rectangular,cylindrical,or hexagonal.

Thickness of ceramic is determined on the basis of application,such as materials handled,lump size,height of fall,etc.

Ceramic rubber wear liner of different sizes and configurations, custom made ceramic rubber wear liners are also available.

Our factory have rich experiences in manufacturing wear and impact resistant liners, our ceramic rubber wear liners have been exported to Australia, USA, Russia, Chile, Canada, Brazil, Kazakhstan, Czech, etc., and are widely used in material handling and mineral processing. So we assure you the quality.

Advantages of Ceramic Rubber Wear Liner:
1. Excellent wear resistance, wear life of high alumina ceramic is approx. 5 times longer than rubber and 10 times longer than steel.
2. More impact resistant, rubber or polyurethane cushions makes more impact resist.
3. Available in irregular shapes and sizes

Fixing methods of ceramic wear liners

- Ceramic wear liner can be produced with steel backing plate and studs or countersunks for bolt on installation
- Ceramic rubber mat with cn bonding layer for cold vulcanizing process
- Magnetic ceramci rubber liner

Ceramic on rubber mats, rubber ceramic mats.

Rubber backed ceramic mats are vulcanzing ceramic tiles into rubber matrix, such ceramic mats are vulcanizing ceramic tiles into rubber matrix, such ceramic mats do not have steel backing plate. Rubber ceramic mats can be bended to suit the facilities, especially for the curved facility, such as cyclone.

Ceramic on rubber mats can be produced with a cn bonding layer. See below image please, the green layer is cn bonding layer, which can deliver fast and excellent bonding adhesion.

500mm x 500mm x 8mm rubber backed ceramic mats, 4mm ceramic on 4mm rubber.

Ceramic on rubber mats, 14mm thick hexgon ceramic tiles on 6mm rubber. AF 20 ceramic tiles on 6mm or 10mm rubber.

Technical Data Sheet of Rubber Ceramic Wear Liners

Item	Description	Unit	Result
Alumina Ceramic
1	Alumina (Al₂O₃)	%	92
2	Density	g/cm³	3.62
3	Hardness	HV30	1000
4	Fracture Toughness	MPa.m^1/2	3.82
Rubber
1	Material		NR , SBR blend
2	Gravity	g/cm³	1.12
3	Tensile Strength	MPa	21
4	Hardness	Shore A	60+/-5
5	Elongation	%	500
6	Abrasion Loss	mm³	100
7	Aging Coefficient (70ºCx48h)	%	8.7
8	Temperature Range	ºC	-40~80

Magnetic Ceramic Polyurethane Wear Liner

Available Ceramics
1. Alumina Ceramic tile, Al₂O_³content: 90~99%
2. High performance ceramic
3. ZTA ceramic liner

ZTA ceramic wear liner Description
Zirconnia Toughened Alumina introduces ZrO₂, Cr₂O₃ and TiO₂ with similar lattices to Al₂O₃in the ceramic formula, resulting in higher strength and toughness than alumina ceramics. ZTA ceramic wear liner is new type of super wear resistant and impact resistant lienr. ZTA ceramic is a composite product made of zirconium and aluminum vulcanized to a steel plate with rubber

ZTA ceramic tiles offer good impact resistance due to the increased zirconia powder. This is why ZTA liners are ideally for the extreme conditions, highly impact and wear areas

Traditional 92% or 95% alumina ceramic liners are economic wear liners for moderate wear and low impact applications. For areas mainly suffering sliding area, 92% or 95% alumina ceramic liner is effective and of low cost

ZTA Ceramic Wear Liner

We also provide wear solutions for material handling and mineral processing industries, a combination of different wear liners are available to suit different applications

The following information are helpful when selecting ceramic wear liners

Ceramic Lined Rubber Pipe

Ceramic directly lined on steel plate

We also provide wear solutions for material handling and mineral processing industries, a combination of different wear liners are available to suit different applications

The following information are helpful when selecting ceramic wear liners

About Factory:

Jiaozuo Debon Technology Co., Ltd, its former factory is Jiaozuo Zhuoer Machinery Manufacturing Co., Ltd, founded in 2001, is a factory dedicated to manufacturing, research and development and application for wear liners for mining and other industries and belt conveyor accessories for material handling equipment. The company has advanced production line and testing equipment for rubber, polyurethane and ceramic products, etc. We are able to produce wear liners and provide different wear solutions according to different applications and requirements.

The main products include: ceramic rubber wear liner, wear resistant rubber sheet, rubber liner, conveyor polyurethane skirt board, pulley lagging, belt cleaner, etc.

And the products are widely used in bulk material handling industries including coal mine, iron ore mine, power station, cement plant, metallurgy, chemical and other quarrying and mining industries.

Our products are exported to many countries including America, Canada, Australia, Russia, Kazakhstan, Chile Southeast Asia, etc. We also have good performance and market share in domestic market. Our customers prove the high quality and consistency

Forward

Related products