Trimming Machine(For finishing to cut off peripheral sides of inner line);
Process:
Put the original board on the workbench of the loading station in preset order manually;
The board is moved by workbench to the board loading position;
Automatically pick up the board and move the board to the Transmission part;
The board is sent in the Heating Station on time;
The heated plate is shifted to the Vacuum Forming Station;
The cylinder pushes the medium mold holder downward and presses the board;
Blow the air to the board;
The forming die moves upward to the right position;
The board is vacuumed and sucked to the forming die;
The upper mold holder moves down to the right position and presses the board;
The cooling device cools down the formed piece;
Demoulding;
The upper mold holder is up;
The forming die goes down;
The medium mold holder moves upward;
The formed piece is positioned to the unloading station;
Unload the piece;
Take the piece out in manual.
Specifications: Forming Area Dimensions: 1900 X 900mm; Maximum Forming Depth: 650mm; Maximum Power Consumption: 400KW(3-phase 380V); Maximum Heating Power: About 160KW(3-phase); Cyclic Process Time: 50s/set, based on the thickness of 3.5mm ABS sheet; 40s/set, based on the thickness of 2.0mm ABS sheet; Compressed Air Source: 1½" (0.5-0.65Mpa) Tap water: 2T/H Sheet Thickness: 3.0-5.0mm Material: ABS, PS or HIPS
Complaint
