Complaint
[ ADVANTEGE OF POWDER COATING MACHINE GALIN-K308 ]
Ideal for dead-corner and grooves:
Stable voltage with even and delicate powder outputting
1.Shape: user-friendly design
2.Material:
a.Gun Shell: anti-static material to protect the high pressure from running away
b.Cascade Shell: Anti-static materials are also adopted to protect the high pressure from losing,double protection to ensure high voltage stability
3.Powder ascending rate: 65%~85%
4.Hopper: removable powder hopper for clean easily
5.Screen: LED screen makes data more accurate,LED for atomization makes powder atomization data more accurate
| GALIN POWDER COATING MACHINE (K-308) ELECTRICAL DATA | |
| Nominal input voltage | 220V (100V-240VAC) |
| Frequency | 50/60 Hz |
| Input power | 40 VA |
| Rated output voltage(to gun) | 12~18VPP |
| Rated output frequency(to gun) | About20KHZ |
| Protection type | IP54 |
| Temperature rang | +10ºC to +40ºC (+50ºF to +104ºF) |
| Solenoid Valve Voltage | 24VDC |
| Gun output voltage | 0-100KVDC |
| Gun output current | 0-100μA |
| GALIN POWDER COATING MACHINE (K-308) PNEUMATICAL DATA | |
| MAX.Input pressure | 8bar |
| MIN.Input pressure | 5bar |
| Output pressure | 0~8bar |
| Max.Water vapor content of the compressed air | 1.3g/m³ |
| Max.Oil vapor content of the compressed air | 0.1mg/m³ |
| Max.Compressed air consumption | 19N |
| GALIN POWDER COATING MACHINE (K-308) GUN PARAMETER | |
| Input | 12~18VPP |
| Voltage Frequency | Around 22KHZ |
| Input Current | <0.5A |
| Output Voltage | 15~100KV Negative |
| Max.Output powder volume | Around 600G/MIN |
| Gun cable | 4 M |
| Gun weight | 425g |
| [ APPLICATION AREA OF POWDER COATING MACHIEN(K-308) ] |
| DELIVERY & PACKING OF POWDER COATING MACHINE(K-308) |
| Control Panel with All Kinds Of Connectors | 1 Set |
| Manual Coating Gun with Round Nozzle with Cable | 1 Set |
| Injector | 1 Set |
| Powder Hose | 1 Set |
| Air Tube | 1 Set |
| 304 Stainless Hopper | 1 Set |
| [ COMPANY INFORMATION OF GALIN ] |
Weifang Galin Powder Coating Equipment CO.,LTD
which located in Shandong district, specializes in manufacturing the coating equipment.We are a typical Chinese supplier and specialized in the research, development and production of the powder coating system and liquid painting system.
Main products: booth, hopper, powder coating machine/unit, electrostatic spray gun, panel controller, HV module, PCB board, injector/pump, powder hose, filter and other parts and so on.
In addition,we can make all kinds of high voltage cascade, provide perfect substitutes for well-known brand spare parts.
We not only supply the high-quality coating equipment,but also the best service.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.
| ATTENTIONS OF POWDER COATING MACHINE(K-308) |
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged | Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted | Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration | Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed | 1.Connect the machine to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
