Complaint
| Diameter DN mm | Tensile Strength MPa | Non-Proportional elongation stress MPa | Elongation (Lo=200mm) % | Bending times | Bending Radius R/mm | Section reduction rate /% | Torque Twist Times Every 210mm | Initial load of 70% nominal breaking strength, After 1000h,Stress relaxation rate |
| 3.00 | >1470 >1570 >1670 >1770 | >1100 >1180 >1250 >1330 | >1.5 | 4 | 7.5 | \ | \ | <8 |
| 4.00 | 4 | 10 | 35 | 8 | ||||
| 5.00 | 4 | 15 | 8 | |||||
| 6.00 | >1470 >1570 >1670 >1770 | >1100 >1180 >1250 >1330 | 5 | 15 | 30 | 7 | ||
| 7.00 | 5 | 20 | 6 | |||||
| 8.00 | 5 | 20 | 5 |
| DN(mm) | Dia.Tolerance(mm) | Nominal CSA(S/mm2) | Refer mass per meter (g/m) |
| 3.00 | ±0.04 | 7.07 | 55.5 |
| 4.00 | 12.57 | 98.6 | |
| 5.00 | ±0.05 | 19.63 | 154 |
| 6.00 | 28.27 | 222 | |
| 6.25 | 30.68 | 241 | |
| 7.00 | 38.48 | 302 | |
| 8.00 | ±0.06 | 50.26 | 394 |
| 9.00 | 63.62 | 499 | |
| 10.00 | 78.54 | 616 | |
| 12.00 | 113.1 | 888 |
