Full Pneumatic or Pneumatic and Electric Down The Hole Drill Machines

Min.Order: 1

Product origin: Quanzhou, Fujian, China

Infringement complaint:

Complaint

US$ 6500

Description

Description:
Down-the-Hole Drill Machines are mainly used for perforation working during stone quarrying. Full Pneumatic Down-The-Hole Drill Machines commonly used for drilling use a pneumatic system: the energy thrust is transmitted by compressed air.

In fact Down-The-Hole Drill Machines need air compressors. The pneumatic hammers penetrate the rock mass by means of a drill rod that is nothing more than a shaped steel rod. The pneumatic system is supported or sometimes substituted by the hydraulic system in which hydraulic oil instead of air is used to transmit the energy.

Technical Data:

Model	LQ-PE-90B	LQ-PE-90B
Type	Full Pneumatic	Pneumatic & Electric
Diameter of the drilling hole	Φ65-Φ90	Φ65-Φ90
Max depth of drill hole	30-40 Meter	25-30Meter
Drilling speed	3-6 Meter/Hour	4-6 Meter/Hour
Air consumption	9-12 M 3 /Min	5-8 M 3 /Min
Minimum air pressure	0.6Mpa	0.6Mpa
Drilling direction	Any direction (Horizontal, Vertical, Slant)
Extension distance	1.2 Meters	1.2 Meters
Advance device	Pneumatic motor, reducer, chain	Pneumatic motor, reducer, chain
Rotation device	Pneumatic motor, reducer	Electric motor, reducer
Adjust height of down jack	220mm	220mm
Control panel	Remote control, manual change direction
Net weight	550 KGS	560KGS

When inquiring please sending the following information for our technical reference:
1. The type of motor (Full Pneumatic / Pneumatic& electric / pneumatic &hydraulic)
2. Diameter of the down-the-hole-hammer (65mm/ 90mm)
3. How many meters of pipe needed.
4. Special requirement (if any)

Our Services:
1. Diamond Wire Cutting Operation Training and Guidance
2. Full Consulting Service and Turnkey Solutions for the Stone Quarry

ALWAYS AT YOUR SERVICE--KEENTOOL

Forward

Related products