Good Quality Marine Floating Yokohama Fenders

Min.Order: 1

Product origin: Qingdao, Shandong, China

Infringement complaint:

Complaint

US$ 2900

Description

Good Quality Marine Floating Yokohama Fenders

1. General introduction

ISO 17357 Good Quality Marine Floating Yokohama Fenders with Galvanized Chain and Tyre for marine application in the world. It is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the sea surface and work as a shock absorber when ship to ship transfer operation and ship to dock berthing and mooring operations.

Evergreen Good Quality Marine Floating Yokohama Fenders for Boat with Galvanized Chain and Tyre with all requirements on ISO17357:2002 Sstandard. Our products are certificated by CCS, DNV, GL, LR and BV.

1. Evergreen company get accreditations of both and ISO 2014 quality system.
2. Chinese Military GJB 9001-2001 quality system
3. Qingdao Famous Trademark and Qingdao Famous brand.
4. Certificated by CCS, LR, DNV. GL, ABS,BV and assured by PICC
5. The appointed supplier of Chinese Navy and CNOOC

Construction of Good Quality Marine Floating Yokohama Fenders

Constructed of inner rubber layer, out rubber layer, and synthetic-tire-cord layer.
Thickness of fender wall is over 18mm.
Synthetic-tire-cord layer for reinforcement
Item Unit 1400D/3 Type
Breaking Strength N/per cord >310
Diameter mm 0.75+/-0.05
Density Per 100mm in (90+/-5)

Performance Parameters (ISO 17357)

Nominal Size Diameter x Length	Initial Internal Pressure	Energy Absorption kJ	Reaction Force kN	Hull Pressure (P) kPa
2000 x 3500	50 kPa	308	875	128

Internal Pressure		Minimum Endurable Pressure		Safety-valve Pressure Setting	Test Pressure at 0% deflection
at 0% deflection	at 60% deflection	at 0% deflection	at 60% deflection	Safety-valve Pressure Setting	Test Pressure at 0% deflection
50 kPa	128 kPa	300 kPa	488 kPa	--- kPa	200 kPa

Note: 1. Guaranteed energy absorption (GEA) is the Minimum value at deflection 60±5%.
2. Reaction force is the valve at GEA. Tolerance is ± 10%
3. Hull pressure (internal pressure) at GEA deflection.

All Evergreen Maritime pneumatic fenders are manufactured and tested according to ISO 17357.

Contact:
This is Karen. If you have any questions and requirements, please feel free to tell me. I am happy to work for you.

Phone:0086 17663929277