Description
ECOICE SWEP B25TH Brazed Plate Heat Exchanger , B3-60A Brazed Plate Heat Exchanger is composed of a lot of stainless steel plates and front and rear covers, it is separated copper sheet (or nickel) with high purity and brazed in high temperature furnace.In order to achieve the best heat transfer effect, All corrugated plates will be combined with velocity heat transfer plate with high, middle and low level according to the clients' requirements. It has a compact structure without gasket and outer frame to operate in the condition of high temperature and high pressure.
Technical parameter |
Product name | Flat Plate Heat Exchanger |
Product model | B3-60A |
Unit heat exchanging area | 0.060m2 |
Maximum Flowrate | 22m3/h |
Plate material | 316L or 304 stainless steel |
Welding material | 99.9% copper |
Thickness of plate | 0.4mm |
Volume per channel | 0.111L |
Maximum number of plate | 120 |
Design pressure | 3.0MPa or 4.5MPa |
Test pressure | 4.5MPa or 6.0MPa |
Design temperature | -195 ~+220 |
Connections | the biggest screw threads pipe for water: 5/4", the biggest welded pipe for other fluid : 15/8" |
Refrigeration Capacity | 10-70KW |
Basic Procedures | F1-> F3 F4-> F2 |
Application scope | Heaing Industry, Heat Pump, Cetral Air-conditioning, Refrigeration Equipment, Industrial water cooler, oil cooler, etc. |
Brazed Plate Heat Exchanger Structure :
Application :
Air dryer
Heat pump
Absorption chiller
HVAC
Radiant floor,
Snow melt,
Boiler and Solar water heat exchanger
Heat Recovery and oil cooler: hydraulic oil cooling, engine oil cooling, and fuel oil heating.
Steam heating
Flat plate heat exchanger
Beer wort cooler
Milk pasteurization
Wind turbine oil cooler
Marine oil cooler
If you have any interest , please contact us at any time .
Free samples are available on client request .