316 Food Grade Stainless Steel Wire Mesh Auto Screen Belt Filter for Plastic Extruder

Min.Order: 100
Product origin: Hengshui, Hebei, China
Infringement complaint: complaintComplaint
US$ 10

Description



Stainless steel is the optimum solution for your woven mesh needs. By selecting stainless steel you will utilise its numerous benefits including:
 Long term performance
 Minimal maintenance
 Strength
 Life cycle costing
 Low environmental impact

Stocked Product Specifications ready for same day despatch

Mesh500 inch per lineal inch (fine mesh) to 1 inch per lineal to (coarse mesh)
WeavePlain, Twill, Lock Crimp & Inter Crimp Weave
Grade304 & 316
Length x Width2m Rolls / Sheets x 1245mm width
10m length x 1550mm width rolls
30m length x 1245mm, 1550mm and 1830mm width rolls








Stainless Steel Wire Mesh
Stainless steel wire mesh is used industrially today in filters, sieve and screening etc, as well as in the areas like auto, chemicals, food, electronics and aerospace industries. 

Available in Stainless steel 302 304 316 316L
MeshGuageWire dia (mm)

8
 
240.558
260.457
270.400
280.376

10
 
240.558
260.457
280.376

12

 
240.558
260.457
270.400
280.376
300.315

14
 
240.558
260.457
270.400

16
 
270.400
280.376
300.315

18
260.457
280.376

20
 
260.457
280.376
300.315
320.274

30
 
300.315
320.274
340.234

40
 
320.274
330.254
340.234
360.193
370.173
50

 
340.234
360.193
380.152
60
 
340.234
380.152

80
 
380.152
400.122
420.102

100
 
410.112
420.102
430.091
200470.051

300
480.041
490.031



Dutch Weave Filter Cloth
Plain Dutch Weave:
Plain Dutch Weave can accommodate high flow rates with a relatively low pressure drop.They are woven with each warp and weft wire passing over and under one wire.The weft wires are smaller in diameter than the warp wires and are drawn up close together,creating a dense filtration weave.

Mesh/Inch   (warp×weft)Wire Dia.   warp×weft   (mm)Normal size   (μm)Effective  
area%
Weight   kg/sq.mCloth thickness
  (mm)
7×440.71×0.6331914.25.551.97
8×450.8×0.631015.55.72.00
8×600.63×0.4529620.34.161.53
8×850.45×0.31527527.32.731.08
10×900.45×0.2824929.22.571.01
10×760.5×0.35524821.83.241.21
12×860.45×0.31521120.92.931.08
12×640.56×0.40    21116.03.891.36
12×760.45×0.35519215.93.261.16
14×1000.40×0.2818220.32.620.96
14×1100.4×0.2517722.22.280.855
14×760.45×0.35517314.33.331.16
16×1000.40×0.2816017.72.70.96
17×1200.355×0.22415522.42.190.803
16×1200.28×0.22414519.21.970.728
20×1400.315×0.2013321.5   1.970.715
20×1700.25×0.1613028.91.560.57
20×1100.355×0.2512615.32.470.855
22×1200.315×0.22411515.52.200.763
25×1400.28×0.2010015.21.960.68
24×1100.355×0.259711.32.600.855
28×1500.28×0.189215.91.870.64
30×1500.25×0.188213.51.790.61
30×1400.315×0.207711.42.210.715
35×1900.224×0.147416.81.470.504
35×1700.224×0.166912.81.620.544
40×2000.18×0.1356315.41.240.43
50×2500.14×0.115015.210.36
60×5000.14×0.0555134.10.700.252
50×2700.14×0.105015.20.980.34
65×3900.125×0.0714219.10.780.267
60×3000.14×0.094114.10.960.32
80×7000.125×0.044038.10.600.205
60×2700.14×0.103911.21.030.34
77×5600.14×0.053827.50.740.24
70×3900.112×0.071  3716.30.740.254
65×7500.10×0.0363637.10.430.172
70×3400.125×0.083513.20.860.285
80×4300.125×0.0633216.60.770.251
118×7500.063×0.036  2321.50.380.135


Twill dutch weave
The term "Twill" indicates the warp and weft wire pass alternately over two and under two wires.The term"Dutch" refer to the use of a heavier warp wire in conjunction with a lighter weft wire.
In a Twill Dutch Weave the weft wires are drawn up so tightly that there is always a weft wire above and below the warp wires,creating a weave with the warp wire completely covered,The flow-pass geometry is extremely tortuous,allowing reasonable flow rates while insuring excellent particle size retention.
Mesh/Inch   (warp×weft)Wire Dia.   warp×weft   (mm)Normal size   (μm)Effective  
area%
Weight kg/sq.mCloth thickness
  (mm)
20×2700.25×0.211917.63.140.65
20×2000.355×0.2811812.14.580.915
24×3000.28×0.1811019.63.010.64
20×1500.45×0.3551017.56.021.16
30×3400.28×0.168917.92.840.60
30×2700.28×0.207711.23.410.68
40×5400.18×0.107023.51.730.38
40×4300.18×0.1256315.42.090.43
50×6000.125×0.095117.21.470.305
50×5000.14×0.1147121.830.364
65×6000.14×0.09361.590.32
70×6000.14×0.093110.11.61
78×7600.112×0.07113.51.250.254
78×6800.112×0.082910.31.370.272
80×6800.112×0.08289.81.38
90×8500.10×0.0632612.71.120.226
90×7600.10×0.071249.61.230.242
100×8500.10×0.06322101.140.226
130×15000.063×0.0362118.60.640.135
100×7600.10×0.071207.41.250.242
130×12000.071×0.04518120.800.161
130×11000.071×0.05179.40.870.171
150×14000.063×0.041511.40.710.143
160×15000.063×0.03612.40.670.135
165×15000.063×0.0361411.4
174×17000.063×0.0321312.90.620.127
165×14000.063×0.048.80.730.143
174×14000.063×0.04117.40.74
203×16000.05×0.032109.30.580.114
216×18000.045×0.039.40.530.105
203×15000.056×0.03696.20.670.128
250×19000.04×0.02887.80.510.096
250×16000.05×0.0323.80.630.114
285×21000.036×0.02577.20.440.086
300×21000.036×0.02566.0
317×21000.036×0.02554.7
325×23000.036×0.02444.2
363×23000.032×0.0224.50.400.076
400×27000.028×0.024.70.360.068
500×35000.025×0.01534.90.300.055

Reverse Dutch Weave
Reverse dutch weave is one of special weave wire cloth used in the filtration field of plastic industry,chemical industry,etc.Comparing with the normal dutch weave,warp wire are much more than the weft wires in certain unit area,with a large absolute ratio,so this weave can supply better filtration rate.
Material:302/304/316L etc.stainless steel
(We can products with special materials according to customer's requirements)
Mesh(m):45-720
Width(m):0.097-1.2
Length:10-30(we can products with special specifications according to customer's requirements)
MeshWire diameter(mm)Filtering accuracy
63×180.30×0.4200
107×200.24×0.4150
175×440.15×0.3080
132×320.20×0.40105
290×700.09×0.2055
615×1020.04×0.1640
720×1400.035×0.1115
(Special specification we can produce according to customer's requirements)

Filter belt
Standard technical parameters
Effective area of mesh:113(Can be adjust according to the requirements)
Filtering accuracy:300-70μ.m.(Can be adjust according to the mesh)
Length of mesh:10m/20m
Width of mesh:127mm.(Can be adjust)
Thickness of mesh:2.5mm.(Can be adjust)
Maximum allowable working pressure:380 bar
Advantages:
Continuous work,DO not need stop for work,Save the time and labor
Applicable in a variety of extruders
Constant melt pressure to ensure the best quality products
Applicable to a variety of materials,such as PP,HDPE,LDPE,PS,etc.
Very long service life
Easy to operate
MeshWire Diameter (mm)Thickness  (mm)Width       (cm)
45x150.45x0.6 1.758-85
72x150.45x0.551.78-85
120x160.35x0.45 1.368-85
132x170.3x0.451.38-85
152x240.3x0.401.28-85
160x180.28x0.45 1.278-85
200x400.15x0.270.78-130
260x400.15 x0.27 0.658-130
300x400.15 x0.27 0.658-130
360x400.13 x0.270.68-130
Special specification we can produce according to customer's requirements 


 




Product Tag:
Related categories:
Scroll to Top