Description
Hot Air Gun Heat Gun for PVC Welding MachineHot Air Gun Heat Gun for PVC Welding MachineMajor components name| 1. Nozzle | 7. Impeller | 13. Temperature controller |
| 2. Cylinder | 8. Protective circle | 14. Power switch |
| 3. Heater | 9. Commute set | 15. Electrograph |
| 4. Commute cover | 10. Motor | 16. Filter |
| 5. Impeller | 11. Pump crust | |
| 6. Commute circle | 12. Controllable silicon | |
Hot Air Gun Heat Gun for PVC Welding MachineTechnical data| Rated voltage | 110V | Air volume | 13.8m3/h |
| Max power | 1600W | Air pressure | 3000Pa |
| Temperature scope | 40-700oC | Weight | 1.5kg |
| Insulating intensity | 3750V | Noise | 65 db |
| Outside dimensions | Ф100*330mm Handle Ф56mm |
Hot Air Gun Heat Gun for PVC Welding MachinePackage
Hot Air Gun Heat Gun for PVC Welding MachineOperational guidelines- Turn the heater power to the lowest scale first before welding. Then raise the temperature to the right degree step by step according to your requirement.
- Do not touch the cylinder when operation to avoid scald. Put down it softly after use in order to prolong its life.
- Do not turn off the power immediately after use. Turn the temperature controller to "0" and let the cool air blowing for a while to cool the machine before turn off the power.
- If not professional personnel, please do not open the machine.
Hot Air Gun Heat Gun for PVC Welding Machine
Warning:
Danger!Please make sure the machine is turned off and not connect to the power before taking apart.
Hot air welding machine may cause high temperature when working. If operating incorrectly in dangerous area, it may cause fire or explode. So please work the machine far away from combustible objects or gas.
Do not touch the nozzle when working to avoid scald.
Till the machine cool down completely then move it.
Only use the electrical outlet with earthing. If not earthing, may cause inner parts break. Must use the power cord with effective earthing.
Hot Air Gun Heat Gun for PVC Welding Machine
Attention:
1.Voltage must be 230V and power be earthing.
2.To protect the safety of user and machine, it must install A.C. stabilized voltage supply and leakage protector in working site.
3.The heat from nozzle may fire combustibles.
4.Strictly prohibit working in water or muddy place. Avoid foundering, drenching or moisture.
Complaint
