Complaint
| SKU | 0305SH100282 |
| Model | SH24Go20W |
| Operating Range | 2400~2500MHz |
| Channel width | 20Mhz & 40Mhz |
| Supported standards | IEEE 802.11b/g/n |
| Operating Mode | Bi-directional, half-duplex, time division duplex |
| Connector type | To radio SMA female (hole inside). To antenna RP-SMA female (pin inside) |
| Input power | 0~26dBm (Note: If the input power is greater than 20DBM, it needs to be explained in advance with the supplier, so that the manufacturer can adjust the equipment.) |
| Transmit gain | 25dB |
| Output Power | 20W (43dBm) |
| Receiver Gain | ≤ 22 dB |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | N-K female |
| Power supply | 24V/2A DC, 100~240V |
| Operating Temperature | -25°C to + 55°C |
| Operating Humidity | Up to 75% relative humidity |
| Material | Cast Aluminum |
| LED light | Power status / activity status LED |
| Booster Size | 15.2 x 13.1 x 2.6cm |
| Booster Weight | 870g |
| Features: |
| 1. Easy Installation. |
| 2. Plug and play, no software setup. |
| 3. 3.5dB ultra-low noise. High Gain, High Value, High Performance. |
| 4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times. |
| 5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied. |
| 6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc. |
| 7. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11a, 802.11g and 802.11n (2.4 GHz mode only). |
