Complaint
Top Grade Quality RTV Acetic Silicone Sealant
| Item Commodity | Appearance | Gravity g/cm3 | Surface solidify time,min | Extrude Property ml/min | Flexibility recover% | Peel Strength (Standardrd,MPa) | Fix Extend Adhesive Ability | |
| Vertical | Aclinic | |||||||
| Top grade acid silicone sealant | Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, hard dispersing | ≤3 | No distortion | ≤30 | ≥80 | ≥150 | ≥0.50 | No damage |
| Medium grade acid silicone sealant | ≤3 | No distortion | ≤30 | ≥80 | ≥200 | ≥0.40 | No damage | |
This product are widely used for bonding of glass, rubber, wood, pottery, metal and surface of fiber, this product not suitable to use under water, and nor suitable for bonding of dope, please finish brushing before construction.
1.Make sure surfaces are clean and dry. Remove any soap,oil or grease.
2.Cut tip off cartridge, screw on nozzle, cut nozzle to desired opening at 45ºC angle.
3.For a smooth seal, hold at 45ºC angle and apply by pushing sealant ahead of nozzle.
4.If further caulking is required, complete within 5 minutes. Remove excess sealant immediately with dry paper towel.
5.Normally stick to skins in 5 minutes,dries to touch in one hour. Optimun stength is achieved in 7 days.
6.After sealant is completely cured, excess material can be removed by trimming with a charp blade, avoid undercutting the seal.
7.Resealable: If entire contents are not used, extrude 3/8" of sealant beyond nozzle opening. When ready to reuse, pull out cured plug.
1.Acid Silicone Sealant will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2.Do not put within kid's reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3.When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5.Acid Silicone Sealant should be operated at temperature 5-40ºC,relative humidity 40-80%.
Storage and Packing
Acid Silicone Sealant is non-flammable, seal store in 10-27ºC cool dry place, term of validity for top grade, medium grade, is 12 months, 9 months respectively.
Our Company View
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
Was founded in 1989, Leaders at all levels of care and guidance, in the community friends and the majority of customers with the help and support, has gone through more than 20 years of arduous pioneering and steady development process. Companies from the original workshop-style processing plant to national "Torch Plan" implementation of enterprises, national standards of enterprises, the state's key high-tech enterprises. Group assets worth 150 million.
As the country's largest private enterprise adhesive technology research institute. The Research Institute covers an area of 3600 square meters. A total of five layers, Divided into 28 advanced equipment, full-featured professional laboratory. The company invested more than 1100 million one-time, And The introduction of more than 20 sets of world-class test and testing equipment from Germany and Taiwan. The Research Institute has made a number of international advanced level of scientific research and national invention patents. At present, the company is actively reporting to create a national technology research institute-Global Adhesive Laboratory.
