| Middle Sized Desk Type Pneumatic Hot Melt Machine Equipment Model:BY-3030RR(QD) |
|
| Item | Detailed Information |
|
| Equipment Introduction | This equipment has been used in home appliances and medicine and other fields of hot - melt riveting, temperature control by region. |
| Japan MISUSI original heating device. Hot plate temperature control, with self-test, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees. |
| The cooling system is air-cooled by blowing air. |
| Production cycle time 25S-35S. |
| Equipment Features | Safety: the machine is equipped with protective grating and scald warning safety baffle. |
| The work table height is 750MM(Sitting position) |
| The quipment starting mode: The equipment is started by pushing two starting buttons together with two hands. |
| Technical Parameters | Equipment demension(L)500MM*(W)450MM*(H)1000MM. |
| Maximum allowable die size of equipment(L)300MM*(W)300MM*(H)230MM. |
| Electric power requiement: 3 phases 380V 50Hz(If there are special requirements, customer confirmation is required.). |
| The outlet pressure of the air compressor: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA). |
| Adaptable to ambient temperature: -5ºC~40ºC |
| Adaptalbe to humidity : 20%~80% |
| The noise of the transmission part shall not exceed 70 db. |
Complaint
