Complaint
| Specification | C6241 | C6246 | |||||||||
| Swing over bed | 410mm(16") | 460mm(18") | |||||||||
| Swing over cross slide | 220mm(8-13/16") | 270mm(10-3/4") | |||||||||
| Swing in gap | 640mm(25-1/8") | 690mm(27-1/8") | |||||||||
| Distance between centers | 1000mm (40") | 1500mm (60") | 2000mm (80") | 1000mm (40") | 1500mm (60") | 2000mm (80") | |||||
| Valid length of gap | 165mm(6-1/2") | ||||||||||
| Width of bed | 300mm(11-13/16") | ||||||||||
| Spindle nose | D1-6 | ||||||||||
| Spindle bore | 58mm(2-1/4") | ||||||||||
| Taper of spindle bore | No.6 Morse | ||||||||||
| Range of spindle speed | 12 changes, 25~2000r/min | ||||||||||
| Max.travel of top slide | 128mm(5") | ||||||||||
| Max.travel of cross slide | 285mm(11-1/4") | ||||||||||
| Max.section of tool | 25×25mm(1"×1") | ||||||||||
| Pitch thread of leadscrew | 6mm or 4T.P.I. | ||||||||||
| Longitudinal feeds range | 42 kinds, 0.031~1.7mm/rev(0.0011"~0.0633"/rev) | ||||||||||
| Cross feeds range | 42 kinds, 0.014~0.784mm/rev(0.00033"~0.01837"/rev) | ||||||||||
| Metric threads range | 41 kinds, 0.1~14mm | ||||||||||
| Inch threads range | 60 kinds, 2~112T.P.I. | ||||||||||
| Diametrical pitches range | 50 kinds, 4~112DP | ||||||||||
| Module pitches range | 34 kinds, 0.1~7MP | ||||||||||
| Dia. of tailstock sleeve | 60mm(2-5/16") | ||||||||||
| Travel of tailstock sleeve | 128mm(5") | ||||||||||
| Taper of tailstock sleeve | No.4 Morse | ||||||||||
| Power of main motor | 5.5kW(7.5HP) 3PH | ||||||||||
| Power of coolant pump | 0.1kW(1/8HP) 3PH | ||||||||||
| Standard accessories | |||||||||||
| 3 Jaw chuck and adapter | Wrenches | ||||||||||
| Sleeve and center | Oil gun | ||||||||||
| 4 Jaw chuck and adapter | Steady rest | ||||||||||
| Face plates | Follow rest | ||||||||||
| Drive plate | Center | ||||||||||
| Special accessories | |||||||||||
| Quick change tool post | Live center | ||||||||||
| Taper turning attachment | Digital readout | ||||||||||
