Reflective Type Infrared Detector for Automatic Door

1. Product introduction

IS01 is active reflective infrared motion detection sensor for automatic door  This specialized sensor uses active infrared (active IR) technology to detect the movement and activate the automatic door. It probes the temperature changes in the sensing zone. When a person or  an object is moving towards the door, the heat signal is detected by the sensor, which will indicate the door to open immediately.

Compared to radar sensor, the infrared sensor detecting range is narrow and accurate, it's a great alternative of microwave sensor activation on street front doors with big passenger flow. Its precisely adjusted probing zone can avoid unnecessary detection on irrelevant passing flow.





Near-far Detection Range Adjustment

When the detector has been adjusted to max oblique, and the near-far flap adjust to "5" calibration, the detect distance is the maximum.

When the detector has been adjusted to vertical, and the near-far flap adjust to"1" calibration. The detect distance is the maximum.


Setting the Detector Sensitivity

Sensitivity fine-tuning to adjust the detection sensibility.
H: High Sensibility; L: Low Sensibility

Input and Outline

Yellow Line: Relay Output ( COM NO )
Gray Line: Power in ( AC/DC12-36V )

Common Fault
 

Phnomena	Cause	Handling
No Action	No connection for cable	Please ensure the cable has been connected
	Power or voltage	Please use the standard power (AC/DC12-36V)
Sometimes Does Not Work	Detection lense was polluted by the dust or water drop. So that detection sensibility reduced.	Clean with soft fabric and adjust the sensibility fine-tunning to H
	Detection range is not proper	Adjust oblique of the detector body
	Swinging thing within the detection range	Adjust the detection range or move away the swinging thing.
Error Action	Moving the people within the detection range	Please re-adjust the DIP switch, or adjusst the oblique of the detector body.
	Too sensitive	Adjust the DIP AWITCH to ON position and adjust the sensibility fine-tuning to L position

Product images 




The Internal Structure






Technical Specification
 

Ray Type	Reflect Infrared
Quantity of Ray	8 emit rays and 8 receive rays
The Function Type	Detect moving thing (people)
Max. Installing Height	3m
Sensitivity Adjusting	Sensitivity fine-tuning
Adjustment of Detect Area	Adjusting detector angle 0°~10°
	Adjusting by DIP switch
Power	AC/DC12-36V±5%
Consumption Capacity	Less than 2.5VA
Relay Output	DC50V,0.1A
Output Maintaining Time	2s
Indication of Output	Standby with green light, signal receive with red light
AMB/ENT Temperature	-20ºC~+60ºC
Weight	400g
Color	Silver,black
Accessories	Soft cable 2..5m, mounting screws 2 pieces, installing paper, manual instruction

Other accessories