TBTJJ-5 Cement Mortar Mxier for Laboratory Testing

Min.Order: 1

Product origin: Nanjing, Jiangsu, China

Infringement complaint:

Complaint

US$ 550 ~ 700

Description

Cement Mortar Mxier for Laboratory Testing
Model:TBTJJ-5

Designed by Cement Department of China Building material Science and Research Institute, the mixer is one of the standard equipment specified in (ISO) GB/T 17671-1999 for cement mortar mixing to prepare the cement specimen. Also it conforms to ASTM and JIS for mixing cement paste and mortar.

It is indispensable equipment in the laboratories of cement works, construction sites, universities or colleges and research institutes concerned

Width of mixing blade		135mm
Mixing bowl capacity		5L
Speed of mixing blade		Rotation	Revolution
	low speed	140 ± 5r/min	62 ±5r/min
	high speed	285 ±10r/min	125 ±10r/min
Power supply		220VAC 50/60HZ 370W

3. Structure and Principle of Operation
3.1. Structure
The mixer is composed of the two-speed motor, pot for sand, drive box, main shaft, mixing blade, bowl, bottom seat, column, supporting frame and controller. (see attached figure)

3.2. Principle of Operation
The two-speed motor, connected with the gear reducer, derives the main shaft to make the eccentric seat rotate synchronously. The mixing blade fixed on the eccentric seat will be revoluted and rotated around the ring gear as well. The bowl will be raised by the handle and located with eccentric achute on the frame. Sand filling can be automatic or manual.
4. Hoisting and Installation
4.1. No hoisting device is provided for the mixer.
4.2 It is necessary to place the mixer onto the platform, the surface of which being plane. A layer of rubber board with thickness of 5-8 mm should be cushioned between the platform and the mixer.

1. How long is the delivery time?
Normally goods will be shipped out within 7-10days after contract signed and down payment received.

2. Is it possible to make our own brand/logo on your product?
Yes, but depends on MOQ.

3. What's your MOQ?
This depends on different types of products. If it is a large machine, the MOQ is usually 1 set. For small instruments, such as thermometers, the MOQ is 50 pieces.

4. What kind of payment term you accept?
Normally,
1) If total contract value less than USD 10,000.00 : 100% T/T in advance after contract signed.
2) If total contract value more than USD 10000.00 : 50% T/T in advance after contract signed and 50% T/T after receipt of BL copy. Or, irrevocable LC is acceptable

Forward

Related products