Complaint
| Type | OMV315 | OMV400 | OMV500 | OMV630 | OMV800 | OMV1000 | ||
| Displacement (cm ³/rev.) | 333 | 419 | 518 | 666 | 801 | 990 | ||
| Max. speed (rpm) | cont. | 510 | 500 | 400 | 320 | 250 | 200 | |
| int. | 630 | 600 | 480 | 380 | 300 | 240 | ||
| Max. Torque (Nm) | cont. | 920 | 1180 | 1460 | 1660 | 1880 | 2015 | |
| int. | 1110 | 1410 | 1760 | 1940 | 2110 | 2280 | ||
| peak | 1290 | 1640 | 2050 | 2210 | 2470 | 2400 | ||
| Max. output (kW) | cont. | 38.0 | 47.0 | 47.0 | 40.0 | 33.0 | 28.6 | |
| int. | 46.0 | 56.0 | 56.0 | 56.0 | 44.0 | 40.0 | ||
| Max pressure drop(Mpa) | cont. | 20 | 20 | 20 | 18 | 16 | 14 | |
| int. | 24 | 24 | 24 | 21 | 18 | 16 | ||
| peak | 28 | 28 | 28 | 24 | 21 | 18 | ||
| Max flow (L/min) | cont. | 160 | 200 | 200 | 200 | 200 | 200 | |
| int. | 200 | 240 | 240 | 240 | 240 | 240 | ||
| Net Weight (kg) | 31.8 | 32.6 | 33.5 | 34.9 | 36.5 | 38.6 | ||
| BLINCE Orbital Hydraulic Motor OMV series | |
Displacement: | 315cc,400cc,500cc,630cc,800cc,1000cc |
| Flange: | 4: 4-Ø18 Square-flange Ø200, pilot Ø160×11 W: 4-Ø18 Wheel-flange Ø224, pilot Ø180×10 K6: 4--Ø14.2 Square-flange Ø162, pilot Ø127×11 K4: 4-Ø14.2 Square-flange Ø160, pilot Ø125×11 |
| Output Shaft: | A: Shaft Ø50 , parallel shaft with key 14×9×70 BD: Shaft Ø53.975, splined shaft 16-DP8/16 B: Shaft Ø53.975, splined key 16-DP8/16 C: Shaft Ø57.15, parallel shaft with key 12.7×12.7×57.15 T: Cone shaft Ø60, parallel key 16×10×32 T1: Cone shaft Ø60, parallel key 14.308×14.308×50.8 Q: Shaft Ø45, splined shaft 17Z*2.5×30P×5e M: Shaft Ø45, parallel shaft with key 12×8×70 Y: Shaft Ø45, parallel shaft with key 12×8×45 |
| Ports and drain port: | D: G1 Manifold 4×M12, G1/4 M: M33×2 Manifold 4×M12, M14×1.5 S: 1-5/16-12UN, 9/16-18UNF G: G1,G1/4 M5: M33×2, M14×1.5 S1: 1-5/16-12UN(18),7/16-20UNF(12) |
