Cummins 220/380V Natural Gas Generator

Company Information :

Shanghai Monarch Power Engineering Limited has already established very close relationships with Cummins, Deutz, Isuzu, Lovol, , Iveco, Nissan, Toyota and other manufacturers. We can also provide you with the complete series of engines with the brands above. The engines are used for marine propulsion, marine generators, industrial generators, construction engines, vehicle engines, agriculture engines, etc. 

We has already established cooperation relationships with customers all over the world, with an experienced and professional staff group, as well as senior engineers, technicians and salesmen. Now our company is known as a leading manufacturer in supplying of diesel generators (for both industrial use and marine use). 

We can provide you with generators which are approved by China Classification Society CCS. Our marine generator can be approved by CCS, ABS, BV, DNV, GL, LR, GL, RS, etc. With steady quality, quick and professional service, our company gains the general recognition from users at home and abroad. 

We are sincerely looking forward to establishing business relationships with you for our mutual benefit.

Specifical Specifications :
 

Engine of CUMMINS EG750 Natural Gas Generator Set
Engine Model	CUMMINS KT38
Type	V type 12 cylinders
Bore * Stroke (mm)	159*159
Displacement(L)	37.8
Compression ratio	9.5:1
Rated speed(rpm)	1500/1800
Inlet type	Exhaust Turbocharger/Air-Air Intercooler
Cooling type	Cooling water tank
Fuel System	Low and high pressure
ESC Type	Special for U.S. GAC natural gas
Ignition sequence	1R-6L-5R-2L-3R-4L-6R-1L-2R-5L-4R-3L
The allowed maximum speed (Natural gas supply closed at this time)	2160 rpm
The allowed maximum rotating speed (The ignition system shut down at this time)	2160 rpm
Oil Capacity	135 L
Cooling water capacity	290 L
Maximum engine back pressure	10.2 kpa
Gas consumption(m3kw·h)	<0.3
Rough oil consumption(g/kWh)	<1.6
Radiator and oil cooler heat	250KW
Exhaust pipe heat radiation	285KW
Engine thermal radiation	37.5KW
Alternator thermal radiation	15KW
Cooling water temperature	95 Deg C
Oil temperature	<120 Deg C
Exhaust pipe heat energy (above 120 º C section)	720KW
Exhaust temperature (before vortex )	670±15 Deg C
Exhaust Flow	6800 m³/h
Fan exhaust flow	17 m³/s
Noise level from 1 m	less than 100 db(A)
Alternator of CUMMINS EG750 Natural Gas Generator Set
Alternator Model	Engga EG400L-800N
Excitation Method	Brushless Permanent Magnet
Winding pitch	2/3 pitch
Number of poles	4
Bearing number	1
Stator Windings	6 ends
Insulation Class	H class
Protection class	IP 21 or IP 23
Load type	Continuous operation
AVR Model	WT-2
Alignment	Fly wheel
Temperature Range	Less than 125 degrees Celsius
Overload  Capacity- the percentage of rated power	110%
Waveform distortion rate, no-load	<5%
Voltage Regulation Mode	AVR
Voltage Regulation Range	±5%
Steady State Voltage Regulation	±1%
No-load line voltage sine wave distortion	<2%
Telephone interference factor (TIF)	< 50
CUMMINS EG750 Natural Gas Generator Set
Rated Output(KW)	750
Standby Output(KW)	825
Voltage(V)	400
Current(A)	1350
Size(mm)	4400*1700*2310
Approximate weight(KG)	8400
Emission levels (Nox)	Euro II emission(mg/m³)
Naturally aspirated engine intake air temperature	None
Air temperature before entering the air to air intercooler	82-87(Deg C)
Air temperature after entering the air to air intercooler	35-42(Deg C)
Rated Power @ 0.8 power factor (w / pump s and w / o fan)	750KW (continuous operation)
Total energy input (100% load)	2072(KW)
Electrical efficiency	36.20%
Thermal efficiency	87.90%
Control panel(Deepsea or others)	Synchronizing Control, Multilingual Mode Digital Control, Diagnostic Function, Direct Text Indicate of Faults, MOBUS Communication Protocol, Compatible Communication, Exchange Telecommunications,  Wired Control Data Output, Automatic or manual start

Detailed photos of our products :



Our Service :
 

Why choose us?

 

Advantages we have :

A. Experienced engine, marine engine,diesel engine, generator, generator set supplier;

B. Professional technical team and sales department for your service;

C. Our products recognized by CCS, IMO Certificate;

D. All the questions will be dealed within 24 hours;

 

Benefits you get :

A. Stable quality

B. Competitive price

C. Satisfactory service before and after sale