Model | ACMEUD11-___K | |
Rating capacity | 1KVA-20KVA | |
Input | Phase/Wire | 1PH 2W+G |
Voltage | 240V/230V/220V±20% 120V/115V/110V±20% | |
Frequency | 50/60Hz±5% | |
Control way | MOSFET-IGBT PWM pulse width modulation | |
Output | Waveform | Sine wave, THD 3% |
Voltage stability | 220V±2% 110V±2% | |
Frequency | 50Hz,60Hz±0.5% | |
Temporary change | 100% load change, ±4% | |
Overload capability | 120% rated current,automatically switch to bypass (BYPASS) after 5 seconds 150% rated current,automatically switches to bypass after 10 cycles(BYPASS) | |
CF | 3:1 | |
Load PF | 0.8 Lag | |
Power failure conversion time (MS) | 0 | |
Static switching time (ms) | 0 | |
Batteries No. | 4/8/10/16 | |
Battery | Type | Lead-acid maintenance-free battery |
Power time | Standard 5 minutes, can be up to 8 hours (full load) | |
Charge time | 90% charge in 7-10 hours | |
Efficiency(full load) | >65%/>80%/>86% | |
Noise | 50dc/55db/60db | |
Protection | Overload limit current output, Overload/short-circuit protection, burst voltage protection (220V UPS-470V, 110V UPS-240V) Off-alert suppression capacity up to FCCA level | |
Light | The mainpower is OK (green light) The converter is OK (green light) Bypass output (yellow light) Battery low Voltage (red light) Overload (red light) Fault (red light) | |
Alarm | Three segments Every 4 seconds after the power outage The battery will be exhausted, every second to tweet Continuous lying in the event of a fault or battery exhaustion | |
Computer Interface | 9PinD Type connector(Option) | |
Ambient temperature humidity | 0~40ºC Up to 95% without condensation | |
Size(mm) | 235×350×475/235×470×600/270×635×690 450×980×550/580×1180×490 | |
Weight(KG) | 38-260KG | |
Input device | Terminal row |