Thickness (mm) | 0.8, 1.0, 1.2, 1.5, 2.0, 3.0, 4.0 or Customized |
Width (cm) | 5, 7.5, 10, 15, 20, 25 ... 100 or Customized |
Length (m) | 10, 15, 20 or Customized |
Surface Materials | Aluminum, Non-woven Fabric, HDPE etc. |
Base Materials | Asphalt |
Base Mat | Non-felt |
Properties | Test Result | Test Method |
Maximum Load(Tensile strength) | Longitudinal:5.1kN/m Transverse:4.5kN/m | ASTMD2523-13 |
Elongation ar Break | Longitudinal:104% Transverse:90% | ASTM D2523-13 |
Adhesion to Plywood | At 4°C: 19.3kgf/30.5cm At 23°C: 22.4kgf/30.5cm | ASTM D903-98(2019) |
Tear Resistance | Longitudinal:209N Transverse:218N | ASTM D4073-06 |
Thermal Stability | <2.5mm | ASTM D1204-14 |
Flexibility Temperature | No cracks at -29°C | ASTM D1970 |
Moisture Vapor Permeability | 1.6ng/Pa.s.m2 | ASTM E96/E96M-15 |
Seal Ability Around Nail | Excellent | ASTM D1970 Section 7.9 |
Waterproof Integrity of Lap | No water seepage was found | ASTM D1970 Section 7.10 |