High quality/High cost performance Centerless Peeling Turning Lathe for Metal Bar Rod Pipe

Min.Order: 1

Product origin: Yantai, Shandong, China

Infringement complaint:

Complaint

US$ 173000

Description

High Quality Centerless Peeling Turning Lathe for Metal Bar Rod Pipe

General Introduction

It is suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of peeling machine is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.

Strengths & Merits
1. It can process extra long rods, pipes and wires, including coil to coil, and coil to bars.
2. High efficiency: multiple blades simultaneously operate: its work efficiency is several times higher than conventional lathe.
3. High precision: diameter tolerance of finished products ≤h9, surface roughness ≤6.3 μm
4. Non-pollution: disposals can be recycled.

Parameter Table

Model		WXC130CA
Workpiece Required	Cutting range(mm)	Φ35~ Φ135X3000~unlimited
	Tensile strength σb(Mpa)	≤1100
	Surface hardness	≤HB320
	Bend(mm/m)	≤1.50
	Diameter tolerance	As per GB 702-88 group two
	Roundness	≤diameter tolerance 50%
	Surface roughness(Ra)	≤25~50mm
Finished Products	Diameter range(mm)	Φ30~Φ130
	Radius cutting depth(mm)	0. 5~2.5
	Diameter tolerance	≤IT9(standard diameter tolerance)
	Surface roughness (Ra)	≤3.2μm
	Roundness (mm)	≤0.03
Feeding speed (infinitely adjust speed m/min)		1.0~5.0(Slow down for materials with ceaseless chips, high strength and high hardness.)
Cutter head rotating speed (infinitely variable speed) (r/min)		160~900 (2 level speed gearbox)
Main motor power (kW)		90(4 electrodes)
Feeding motor power (kW)		5.5 (4 electrodes)
Clamping vehicle motor (kW)		4 (servo)
Dimensions (m) (reference)		Host machine 4X3.7X2.4
Weight (t) (reference)		Host machine 11.5
Total capacity (kW)		120
Source of compressed air (prepared by user)		0.4~0.8MPa, 2m³/min, with second grade oil and water separator

Composition Introduction

Main Machine 1 set
Cutting Fluid Circulation Cooling System 1set
Chip Conveyor 1set
Hydraulic System 1set
Electrical System 1set
Inlet table, inlet roller way 1set
Outlet Roller way, receiving box 1set

MODELS FOR YOUR SELECTION
.

Model	Input Dia	Length	Feeding Speed	Cutting Depth	Surface Roughness	Dia.Tolerance	Spindle Motor	Total Capacity
WXC20	ф5-ф20mm	≥1400mm	1-25m/min	0.5-2mm	Ra≤3.2	IT9	22KW	30KW
WXC40	ф5.5-ф40mm	≥1400mm	1-15m/min	0.5-2mm	Ra≤3.2	IT9	45KW	63KW
WXC60	ф13-ф75mm	≥2000mm	1-15m/min	0.5-2mm	Ra≤3.2	IT9	45KW	63KW
WXC80	ф16-ф85mm	≥2200mm	1-12m/min	0.5-3mm	Ra≤3.2	IT9	55KW/75KW	75KW/90KW
WXC100	ф25-ф110mm	≥2800mm	0.5-10m/min	1-4mm	Ra≤3.2	IT9	75KW	95KW
WXC130	ф35-ф135mm	≥3000mm	0.3-6m/min	1-5mm	Ra≤3.2	IT9	90KW	120KW
WXC160	ф45-ф170mm	≥3500mm	0.3-5m/min	1-5mm	Ra≤3.2	IT9	110KW	140KW
WXC200	ф70-ф210mm	≥4000mm	0.3-4m/min	1-5mm	Ra≤3.2	IT9	132KW	165KW
WXC250	ф95-ф260mm	≥4000mm	0.2-2.5m/min	1-5mm	Ra≤3.2	IT9	160KW	210KW
WXC350	ф150-ф360mm	≥4500mm	0.1-2m/min	1-10mm	Ra≤3.2	IT9	200KW	265KW
WXC400	ф205-ф410mm	≥4800mm	0.1-2m/min	1-10mm	Ra≤3.2	IT9	250KW	345KW
WXC500	ф315-ф510mm	≥5000mm	0.1-1.5m/min	1-10mm	Ra≤3.2	IT9	315KW	415KW