HDPE Pontoon cube Combination with Slideway Water Floating Dock
HDPE Floating Cube Pontoon for Floating Dock System Floating Cube Pontoon is a basic unit of any floating construction; you can use our products to make useful and beautiful projects. Like floating dock, pier, fish farm, breakwater, walk way, pontoon bridge, fender, swimming pool and so on
1, floating dock Raw material is high-density polyethylene (HMWHDPE), Corrosion resistant, antifreeze, antioxidant, anti violet lines of reinforced material, free from sea water, chemicals, chemicals, oil stains and water biological erosion; no pollution, no pollution to the environment 2, floats pontoon top surface is anti-skid design, security and stable; Four corners are arc obtuse angle shape, avoid cement, wood, iron facilities common danger, for example: slip, broken wood, rusty nail stab etc. 3, higher capacity, floating pontoon are stable, long time service, the each square meter buoyancy can reach 350kg. 4, The floating dock service life can reach 15 years, In addition to the strong natural and man-made improper use, no need any maintenance, maintenance costs 5, assembly is simple, fast, flexible and diverse modeling, adopts module structure, can change the platform according to the requirements. The floating pontoon with bright colors, good shape, suit for different needs 6, The cost is reasonable and economical. It can save a large amount of maintenance, maintenance, replacement, overhaul costs and time 7, Have many different accessories, such as mooring bollards, anti-thrombus, billiards, guardrail, landing ladder, can berthing different small and large ship; and because of the characteristics of water floating platform on the buoyancy, it can floating up and down according to the water level. Passengers can on board embarkation and disembarkation safety and comfort.
Transport
Installation 1. Every pontoon has four lugs. Each lug is marked with 1, 2, 3 and 4. Put pontoons in the same direction. (According to the logo on surface or the hole in side). 2. Insert connecting pin into the hole of the over-lapping lugs and knock it into place by rubber hammer. 3. Use wrench to turn the connecting pin 45 degrees.