Filter Net Welding Hot Plate Welding Machine

Min.Order: 1
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 10000 ~ 90000

Description
Filter Welding Machine      Model:BY-950RB(WS)
ItemDetailed Information
Product IntroductionThis equipment is customized model, which has been used in clean filter welding. 
The modular design of the high-power servo screw mechanism improves the working efficiency by 20-50% compared with the pneumatic equipment, with higher control precision and 0.05mm of repeated positioning error.
 Double station welding, one side loading, while the other side welding.
 Japan MISUSI original heating device. Hot plate temperature control, with self-test, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees.
 Equipped with man-machine interface and Chinese and English bilingual interface operation.
 Adopt Japan YASKAWA high power servo motor/MISUSI synchronous wheel, synchronous belt/SMC cylinder/RONGDA bearing.
Machine was designed with integral square tube and metal plate welding to strengthen the overall rigidity, with more stable operation.
Production cycle time 55S-65S.
Equipment FeaturesMan-Machine EngineeringSafety: the machine is equipped with protective grating and scald warning safety baffle.
Permission management: device setting administrator and operator permissions.
The work table height is 900MM.
The quipment starting mode: The equipment is started by pushing two starting buttons together with two hands.
Equipment capability/Quality traceabilityThe device has the protection function of misoperation(the machine will not work if the machine is not operated according to the standard operation procedures).
Production records:The equipment can meet customer requirements for recording and storage of product capacity.
Alarm failure and code recording:The equipment automatically displays the alarm fault code and records it automatically
Man-machine interface - visual information of man-machine interface includes current operation steps, alarm information and solutions.
IMS interactive function: support Ethernet communication. The equipment has the function of QR Code scanning and identification. The data of hot plate temperature, displacement and time can be recorded and sent to the company's IMS system. (This function is customized according to customer requirements.)
Equipment Clamp/Quick die changeThe equipment has a big surface and a man-machine interface, easy to operate and debug.
The Clamp of the equipment is fixed by simple, fast and reliable fixing method such as locating pin, without special tools.
The pneumatic part of the clamp and the sensor part of the device are designed with quick plug and pull.
Quick die change time is 10-15 minutes.
Electrical layout/SafetyThe equipment is equipped with sensor identification, and the type selected by PLC is different from the current fixture, which will alarm.
Locking function - when the product is testing NG, the product is locked in the workstation (requires a designated person to unlock).
Device alarm: fault information or corresponding fault code is displayed on the man-machine interface.
Control system voltage DC24V.
I/O- each station has a 10% I/O allowance for future expansion.
Technical ParametersEquipment demension(L)2000MM*(W)1300MM*(H)2500MM.
Maximum allowable die size of equipment(L)950MM*(W)800MM*(H)650MM.
Electric power requiement: 3 phases 380V 50Hz(If there are special requirements, customer confirmation is required.).
The outlet pressure of the air compressor: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA).
Adaptable to ambient temperature: -5ºC~40ºC
Adaptalbe to humidity : 20%~80%
The noise of the transmission part shall not exceed 70 db.
Overall Power:10KW






















Product Tag:
Related categories:
Scroll to Top