150A Three-Phase Three-Wire Rack-Mounted Active Harmonic Filtering Device with IGBT and Monitor 3p3l/3p4l (power quality) Apf3l-400/150 Filter for Tyre Industry

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 1000 ~ 600000

Description
PRODUCT INTRODUCTION:
        WT-APF active power filter (APF) is a new type of power electronic device used to dynamically suppress harmonics and compensate reactive power. It detects the load current with sampling circuit, extracts the harmonic component in the load current through internal DSP calculation, and drives IGBT, The control inverter generates a harmonic current which is equal to the harmonic current of the load and in the opposite direction and injects into the power grid to achieve the purpose of filtering. According to the same principle, APF can also compensate the negative sequence current component of asymmetric three-phase circuit, to realize the three-phase unbalance compensation and reactive power compensation.
        Comprehensive functions: intelligent harmonic filtering, dynamic reactive power compensation and three-phase load balancing can be realized at the same time
        Excellent performance: with nearly perfect harmonic filtering effect and continuous dynamic reactive power compensation, the power factor is increased to more than 0.95 to ensure load balance and safe operation of equipment
        Advanced technology: continuous, dynamic tracking compensation, 40us response to load change, 10ms compensation. The filtering performance is not affected by the system impedance. The harmonic compensation characteristics are not affected by the frequency change of the power grid, and the compensation ability is not limited by the grid voltage.


MODEL DESCRIPTION:


SPECIFICATION SHEET:
Wall mounted
typewidth
(
mm)
height
(
mm)
depth
(
mm)
mounting hole
(mm)
weight
LL1HH1DD1D2diKg
50A38137517817062358055060030030
75A50650020820062358055060040038
100A50650024824065361658063040046
150A50650027827071067063868540058
Rack-mounted
typewidth
(
mm)
height
(
mm)
depth
(
mm)
mounting hole
(mm)
weight
LL1HDD1dih1D2Kg
50A4453751705805504131003540530
75A57050020058050053812038.553538
100A5705002406165805381604053546
150A5705002706706385381904053558
Three-phase Three-wire Tri-level Three-leg APF
TypeRated voltage
(V)
Rated current
(A)
Rated frequency
(Hz)
Dimension(mm)
Width * depth * height
weight
(kg)
Installation mode
APF3L-400/454004550/60800*600*1500140vertical
APF3L-400/604006050/60800*600*1500140vertical
APF3L-400/804008050/60800*600*1800180vertical
APF3L-400/10040010050/60800*600*1800180vertical
APF3L-400/15040015050/60800*600*1800250vertical
APF3L-400/20040020050/60800*600*2200300vertical
APF3L-400/25040025050/60800*600*2200300vertical
APF3L-400/30040030050/60900*600*2200400vertical
APF3L-400/70040070050/60800*600*2200*3400*3vertical
Three-phase Four-wire Tri-level Four-leg APF
TypeRated voltage
(V)
Rated current
(A)
Rated frequency
(Hz)
Dimension(mm)
Width * depth * height
weight
(kg)
Installation mode
APF3L-400/454002050/60800*600*150080vertical
APF3L-400/604003050/60800*600*150090vertical
APF3L-400/804004550/60800*600*1800120vertical
APF3L-400/1004008050/60800*600*1800220vertical
APF3L-400/15040010050/60800*600*1800250vertical
APF3L-400/20040015050/60800*600*2200250vertical
APF3L-400/25040020050/60800*600*2200300vertical
APF3L-400/30040025050/60900*600*2200300vertical
APF3L-400/70040070050/60800*600*2200*3400*3vertical

PRODUCT PARAMETERS:
Working voltage380V(-40%~+40%) ; 690V(-20%~+20%)
Working frequency50/60Hz±5Hz
Wiring modeThree-phase three-wire ; Three-phase four-wire
Current sampling5A(CT:100/5~10000/5)
Current sampling positionLoad side / grid side optional
Circuit topologyThree level
Number of parallel unitsUp to 12
Switching frequency21.6KHz
Cooling modeIntelligent air cooling

TECHNICAL PERFORMANCE:
Filtering range2-50 times
Selection of filtering times2 ~ 50 times optional
Single filter setting2 ~ 50 times optional (can be set)
Overall filtering capabilityTHDi(Total distortion rate of harmonic current)<3%
Reactive power compensation-100%~+100%(Power factor can be set)
Three phase unbalancesupport
overload protectionsupport
Instantaneous response time<100us
Total response time<10ms
Noise<65dB
Protection functionOver voltage protection, under voltage protection, short circuit protection, inverter bridge reverse protection, etc

COMMUNICATION MONITORING:
Expand functionThe 10 channel TSC interface can operate with TSC / TSF
Communication interfaceRS485 Network port
Communication protocolGeneral agreement on electricity;modbus protocol;YCP/IP
Display interface3 / 7 Inch Touch Screen
Display informationVoltage, current, power, harmonic and other grid parameters
MonitorSupport independent monitoring / centralized monitoring of each module
Fault alarmUp to 500 alarm messages can be recorded

USAGE ENVIRONMENT:

Ambient temperature-20ºC~+45ºC
Storage temperature-40ºC~+65ºC
Relative humidityMaximum 95% frost free
AltitudeBelow 1500m, the power will be reduced by 1% every 100m
Protection levelIP20,Higher protection level can be customized
Installation modeWall mount, rack, whole machine
Incoming line modeBack feed, upper feed

SCOPE OF APPLICATION:
        W-APF3L is suitable for harmonic filtering of three-phase three wire industrial load (rated voltage is 380V, 660V, 690V, 1140V system), such as rectifier, frequency converter, large UPS, intermediate frequency furnace, electric arc furnace and other nonlinear loads
        W-APF4L is suitable for harmonic filtering of three-phase four wire (rated voltage 380V / 220V), such as lighting equipment of commercial office building, computer, UPS, elevator, frequency conversion air conditioning and other nonlinear loads. It is suitable for harmonic filtering of primary and secondary harmonic current generated by neutral line of nonlinear load.



Product Tag:
Related categories:
Scroll to Top