Diamond PCD CNC Machine Cutting Tool with 70 Degree for Carving Small Letters

Diamond PCD CNC Machine Cutting Tool with 70 Degree for carving small letters

It is mainly used for natural granite, marble, stone, sand, glass, jade, ceramic tile, bo changes a brick, such as Mongolia black on the stone material of high hardness lettering or relief.

NO.	MODEL	SHK(mm)	CED(mm)	ANGLE
1	KA6-4501	6	0.1	45
2	KA6-4502	6	0.2	45
3	KA6-4504	6	0.4	45
4	KA6-4505	6	0.5	45
5	KA6-4510	6	1.0	45
6	KA6-6001	6	0.1	60
7	KA6-6002	6	0.2	60
8	KA6-6004	6	0.4	60
9	KA6-6005	6	0.5	60
10	KA6-6010	6	1.0	60
11	KA6-9001	6	0.1	90
12	KA6-9002	6	0.2	90
13	KA6-9004	6	0.4	90
14	KA6-9005	6	0.5	90
15	KA6-9010	6	1.0	90
16	KA6-1201	6	0.1	120
17	KA6-1202	6	0.2	120
18	KA6-1204	6	0.4	120
19	KA6-1205	6	0.5	120
20	KA6-1210	6	1.0	120
21	KA8-9001	8	0.1	90
22	KA8-9002	8	0.2	90
23	KA8-9004	8	0.4	90
24	KA8-9005	8	0.5	90
25	KA8-9010	8	1.0	90
26	KA10-12004	10	0.4	120

Material applied for: Glass, ceramics, silicon slice, crystal, granite, marble, malmstone and so on... Hard and fragile materials procession. 

 It is sharper, higher efficiency, not deformation and precise engraving. So, it is better for engraving marble, bluestone, sandstone etc. It is better selected for engraving relieves, goodfor engraving large characters, too. 

If it is the first time that you use our engraving bits for the first time, please contact us to get suggestions which are good skill for engraving in different kinds of stones and different engraving ways. For this, we will provide you the most professional tools collocation programs. If you have any questions with stone engraving, please contact us and send your small piece stones to us. Professional laboratory fortesting and engraving stone, marble, granite, and others hard materials. We could find a better precept for using our bits and right parameters of engraving machine. 

We are the professional manufacturer of this engraving tool, our quality is widely accepted in both domestic and overseas markets, welcome to inquire our engraving mills, you can get the best quality engraving tools with the best prices.