MPO-Plus Singlemode Optical Fiber Patchcord

BRIEF INTRODUCTION
The MT-RJ and MPO are the MT series. Small size, Multi-channel is the most prominent feature, which greatly facilitates the high-density wiring. The MT series connectors have been widely applied to theCATV, Multimedia, Gigabit Ethernet, active device interface, data processing networks, telecommunication networks, asynchronous Transmission Mode (ATM). The MT-RJ is duplex ferrule plug-jack (RJ-45) design and the MPO can be 24 fibers, the MPO patchcord cable can be ribbon fiber or breakout fiber, also, the MTP is available; the MT series patchcord have low insertion loss and high precision guide pins exact alignment.
 

  SPECIFICATIONS 

ITEM	PARAMETER
Applicative connector type	MTRJ,MPO,MTP
Fiber mode	Single mode(PC)	Multi-mode(PC)
Operating wavelength	1250~1650nm	850nm, 1300nm
Test wavelength	1310nm, 1550nm	850nm, 1300nm
Insertion Loss	MT-RJ: typical≤0.40dB,Max≤0.50dB MPO: typical≤0.50dB,Max≤0.70 dB	MT-RJ: typical≤0.25dB,Max≤0.30dB MPO: typical≤0.40dB,Max≤0.50dB
Return Loss	APC≥50dB	/
Applicative cable OD.	MTRJ: Duplex ∮2.0mm / Simplex ∮3.0mm; MPO: Ribbon fiber/breakout fiber
Repeatability	≤0.10dB
Interchangeability	≤0.20dB
Durability	≤0.20dB typical change,500 mating
Tensile Strength	≥120N(without 0.9mm patchcord) or customized
Operating Temperature	-20ºC to +70ºC
Storage Temperature	-40ºC to +85ºC

 
 




ORDERING OPTIONS

Fiber Type	Cable Type	Connector	Boot Size	Boot Color	Polishing Type	Length
SM: 9/125μm	Simplex(2-fiber)	Male	2.0mm	Black	PC	Customized
MM: 50/125μm	Duplex	Female	3.0mm		APC
MM: 62.5/125μm	Ribbon		Ribbon
MM: OM3	Breakout