Description
Subject: Rolling Shutter Door Roll Forming Machine
Components for the Machine
The roll forming machine consists of 3-ton manual uncoiler, infeed guide, fixed position driven forming stations, rectifying device, cutting equipment, hydraulic station, PLC control console, and manual unload product run out table.
Technical Parameters
Material Specification
aluzinc, galvanized and carbon steel.
Thickness
0.8 mm to 1.2mm.
Main Motor Power
5.5 kw.
Hydraulic Power
3 kw.
Yield Stress
235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll Forming Speed
12 m/minute.
Cutting Tolerance
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler
Max. Capacity: 3000kgs.
Coil Inner Diameter
508mm.
Voltage
380V, 3 phase, 50 HZ.
Numbers of Stations
12 stations, and 2+3 rectifying rollers.
Type of Cutting
Roll-formed and length-set profile cutting.
Material of Main Equipment
Roller Material
High grade S45C forged steel, coated with hard chrome.
Active Shaft Material
High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements
PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Process Sketch:Uncoiling the sheet -Infeed guiding -Roll forming - Measure length - Rectifying - Cutting the panel - Panels to the supporter (option: automatic stacker).
Complaint
