Ride on Floor Washing Machine Electric Floor Scrubber

1. High power rear drive axle motor to increase the climbing capacity;

2. Stop suction delay, to stop dripping from leaking;

3. Squeegee automatic lifting when stopping or reversing to ensure longer life;

4. The whole short-circuit intelligent protection, motor negative overload;

5. Squeegee automatically reset to achieve the most perfect water effects;

6. On-board charger design to ensure charging operation anywhere at any time;

7. Brush compressing function to ensure thorough cleaning;

8. Large capacity, deep cycle maintenance-free battery configuration, ensure long hours of work;

9. Suitable for a variety of slope cleaning and slope crawling

Part II: Advantage of Floor Washing Machine

1.Our electric floor scrubber machine is use Amer Propelling Motor, AMETEK Suction Motor and PG Controller.

2.For floor scrubber brush pan, our company is use Malish (US brand).

3.Lead acid maintenance free battery and so on.

4.Glue: Rubber Absorbent Strip: PU material oil absorbent adhesive strip, rubber material wear-resistant adhesive strip.


Part III: Applicable floor materials

It is suitable for flat and hard ground. scrubbing and drying can be completed in one go. The washed and sucked ground is free of stains.Dirty water, soil, sand, impurities, oil stains and the like can be sucked into the sewage tank fully without water stains and footprints, thus achieving the effect of deep cleaning.

Applicable to floors: epoxy floor, floor tile, ceramic tile, wood floor, painted surface, PVC floor, cement matte, terrazzo, concrete and other floors of different materials. 

 Working Area: factory workshops, airports, railway stations, bus stations, underground garages, exhibition halls, supermarkets, shopping malls, hospitals, schools and other indoor environments. 
 The Ground Sterilizer,which is the necessary sterilization artifact for factories and enterprises to resume work.


Part IV: Daily Maintenance of Floor Washing Machine

Check the squeegee blades for wear and if necessary, change them. To replace the squeegee blades, the steps are:

1, Remove the squeegee vacuum hose from its port

2, Lift locking latches and pull squeegee assembly rearward

3, Release the band clamps by lifting the nut

4, Remove squeegee blades

5, To reassemble the squeegee, repeat the above operations in reverse.

Each machine is put on a polywood pallet, then carton;

Wooden box or air bubble film and carton for plastic products or as your request.

Normally, for testing sample, we can arrange the delivery within 7 days;

Q:Why does the brush not turn?
A: Check that the brush master switch is on.

Q: Why is the machine running for a short time?
A: 1. A fully charged machine can operate for 3.5-4 hours.
2. Charge for at least 8 hours.
3. Please contact the after-sales center to solve the problem if it can not operate for 1.5 hours after being fully charged.

Q: Why does the charger not work?
A: 1. Connect the charger to the battery connector.
2. Plug the charger into the power supply.
3. The ammeter pointer should move and the charging lamp should flash.
4. If the above instructions are invalid, please contact the after-sales Center for solution.

Q: What is warranty of products?
A: All of products with one year guarantee of motors(non-artificial reason), any problem within one year,we will help to solve it.

Part VII: How to choose suitable floor scrubber

First of all, you have to look at your own ground conditions:

Types of garbage and dirt: greasy dirt, stains, tire marks, dust, granular garbage, etc. different ground materials should use different methods and methods.

Secondly, which kind of material for the floor?

The floor scrubber integrates the advantages of high performance, durability, high efficiency and so on. It is specially designed to provide the best solution for the small and medium-sized industrial and commercial floor cleaning, which is suitable for all industrial and commercial environments. There are epoxy resin floor, paint floor, concrete, ceramic tile floor, etc. to complete the floor cleaning of production workshop, warehouse, logistics center, supermarket, etc. in a perfect and efficient way. The cleaning can automatically complete the sewage recycling at the same time, so as to achieve a really efficient and perfect cleaning effect!