Complaint
High accuracy Receiver C19H
The C19H high accuracy receiver uses a Hemisphere H328 OEM board. C19 ultilizes dual antena ports to create a serials of additional capabilities. C19 can be used as single base station. moving base, RTK positioning receiver and so on. An advanced type of self-locking connection is employed. the outer casing is made of aluminum alloy with a system that cools the machine. This self-cooling mechanism is coupled with anti-shock technology and more
| Item | Parameter |
| GNSS Module | H328 |
| Power indicator | One LED light |
| Ntrip Caster | GNSS board embedded |
| Ethernet | RJ45 water-proof Ethernet port |
| Serial Port | RS232 standard |
| GNSS Antenna interface | Two TNC type at the same side |
| Shell material | Aluminum alloy |
| Dimension | 167mm*128mm*59mm |
| USB port | - |
| 1PPS&Event(Optional) | Optional, SMA connector |
| Moving Base and Heading | Support |
| Battery | None |
| Channels | 744 |
| Signal Tracking | GPS: L1 C/A, L1P, L2P, L2C, L25 |
| BeiDou: B1, B2, B313 | |
| GLONASS: G1/G2, P1/P2 | |
| Galileo2: E1BC, E5a, E5b | |
| IRNSS: L5 | |
| QZSS: L1 C/A | |
| Update Rate | 10Hz standard, up to 50Hz optional |
| Autonomous | 1.2m horizontal, 2.4m vertical |
| SBAS | 0.3m horizontal, 0.6m vertical |
| RTK | 8mm+1ppm horizontal, 15mm+2ppm vertical |
| Heading Accuracy | <0.16° rms @ 0.5m antenna separation |
| <0.08° rms @ 1.0m antenna separation | |
| <0.04° rms @ 2.0m antenna separation | |
| <0.02° rms @ 5.0m antenna separation | |
| Pitch/Roll/Accuracy | <1° rms |
| Heave Accuracy | 30cm rms(DGPS) 4, 5 cm rms (RTK) 4 |
| Atlas | H10 0.04m |
| H30 0.15m | |
| Basic 0.50m | |
| RTK intialzation reliablity | 0.95 |
| DC Input | 12V, 1A |
| Operating temperature | -40ºC~+85ºC |
| Storage temperature | -40ºC~+85ºC |
| Operating humidity | 5%~95% (Noncondensing) |
| Standard Accessory | Power cable*1, Adaptor*1, Fischer to Serial Cable*1, RJ45 cable*1, TNC to TNC cable*5m*2 |
| Optional Accessory | Choke Ring Antenna, Engineering plastics case |
