Complaint
| Power supply: | ||
| Nominal voltage | DC 12-24V | |
| Operating limits | DC 10.8-28.8V | |
| Immunity from micro power cuts | Typ.5 ms | |
| Max. Startup current | Max. 0.5A | |
| Max. absorbed power | Normal: 4 W (10.8V dc) ; 4.5 W (28.8V dc) Transient Current: Max. 1A (DC12V) | |
| Protection against polarity inversions | Yes | |
| Input parameters: | ||
| Input No | 8 ( I1-I8 ) | |
| Digital input | 8 ( I1-I8 ) | |
| Analogue input | 4 ( I1-I4)(0..10V DC) | |
| Digital inputs( I5-I8 ) | ||
| Input voltage | DC0-28.8V | |
| Input signal0 | < 5V DC; <1mA | |
| Input signal1 | > 8 V DC;>1.7mA | |
| Input current | 2.3mA @ 10.8V dc 2.6mA @ 12.0 V dc 5.2 mA @ 24 V dc 6.3 mA @ 28.8 V dc | |
| Response time | 0 to 1 :<1 ms ;1 to 0 :<1 ms | |
| Maximum counting frequency | 60k Hz(I7--I8) | |
| Sensor type | Contact or 3-wire PNP | |
| Input type | Resistive | |
| Isolation between power supply and inputs | None | |
| Isolation between inputs | None | |
| Inputs used as digital inputs( I1-I4 ) | ||
| Input voltage | DC0-28.8V | |
| Input signal0 | < 5V DC;<0.1mA | |
| Input signal1 | > 8 V DC;>0.3mA | |
| Input current | 0.4mA @ 10.8V dc 0.5mA @ 12.0 V dc 1.2mA @ 24 V dc 1.5mA @ 28.8 V dc | |
| Response time | 0 to 1 :Typ. 1.5 ms ;1 to 0 :Typ. 1.5 ms | |
| Maximum counting frequency | Typ.:4 HZ | |
| Sensor type | Contact or 3-wire PNP | |
| Input type | Resistive | |
| Isolation between power supply and inputs | None | |
| Isolation between inputs | None | |
| Inputs used as analog inputs( I1-I4 ) | ||
| Measurement range | DC 0---10V | |
| Input impedance | Min, 24KΩ ; Max. 72KΩ | |
| Input voltage | 28.8 V DC max | |
| Resolution | 10bit ,0.01V | |
| Accuracy at 25 °C | ± (Max.0.02)V | |
| Accuracy at 55 °C | ± (Max.0.04)V | |
| Isolation between analog channel and power supply | None | |
| Cable length | 10 m max. shielded and twisted | |
| Output parameters: | ||
| Output No. | 4 (Q1-Q4) | |
| Output type | 4Relay output | |
| Continuous current | Resistive load 10A/Inductive load 2A | |
| Max. breaking voltage | AC 250 V DC 30 V | |
| Max. Allowable Power Force | 1250VA 300W | |
| Electrical durability Expectancy | 105 Operations at Rated Resistive Load | |
| Mechanical life | 107 Operations at No Load condition | |
| Response time | Operate Time : 15 mSec. Max. Release Time : 10 mSec. Max. | |
| Built-in protections | Against overloads and short-circuits: No Against overvoltages (*): No | |
| Galvanic isolation | None | |
| Switch frequency: | ||
| Mechanism | 10Hz | |
| Resistor/light load | 2Hz | |
| Sensitive load | 0.5Hz | |
| Wireless technology | ||
| Type of mobile wireless service | SMS, GPRS | |
| Type of mobile network / is supported | GSM, UMTS, LTE | |
Operating frequency
| B1/B3/B5/B7/B8/B20 B1/B5/B8 850/900/1800/1900Mhz | |
| Other parameters: | ||
| Ethernet interface | Yes | |
| Voice alarming | No | |
| Weight | ||
