Single Stage Used Slurry Coal Sludge Pumps

Single stage used slurry coal sludge pumps

BM BH Series Slurry Pump
Name: BM BH Slurry Pump
Pump Type: Centrifugal
Power: Motor/Diesel
Discharge Size: 1-18 inch
Capacity: 0~1000(l/s)
Head: 0~70m

Application and Features:

Type BM, BH, slurry pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The pumps of this type also may be installed in multistage series.
The frame plates for the type BM, BH pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber.
The shaft seals for type BM, BH, pumps may be adoptable of gland seal or expeller seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.

Brief Introcustion to Pump Type Selection:

Refering to the performance curves of the pump the selected capacity range
Should be as follows:
Pump Type BM, BH: 40-80% for higher density, strong abrasive slurries
40-80% for medium density, medium abrasive slurries
40-120% for lower density, lower abrasive slurries

Single Stage Used Slurry Coal Sludge Pumps:
 

Type	Allowable Mating Max.Power (kw)	Clear Water Performance						Impeller
		Capacity  Q		Head H (m)	Speed n (r/min)	Max EFF η(%)	NPSH) (m)	No of Vanes	Impel Dia(mm)
		(m 3 /h)	(L/S)
1.5/1B_BH	15	12.6-28.8	3.5-8	6-68	1200-3800	40	2-4	5	152
2/1.5B_BH	15	32.4-72	9-20	6-58	1200-3200	45	3.5-8	5	184
3/2C_BH	30	39.6-86.4	11-24	12-64	1300-2700	55	4-6	5	214
4/3C_BH	30	86.4-198	24-55	9-52	1000-2200	71	4-6	5	245
4/3D_BH	60
6/4D-BH	60	162-360	45-100	12-56	800-1550	65	5-8	5	365
6/4E-BH	120
6/4D-BH	60	180-396	50-110	7-61	600-1600	55	3-8	4	372
6/4E-BH	120
8/6E-BH	120	360-828	100-230	10-61	500-1140	72	2-9	5	510
8/6R-BH	300
8/6E-BH	120	360-828	100-230	7-52	400-1000	70	2.5-6	4	536
8/6R-BH	300	360-828	100-230	7-52	400-1000	70	2.5-6	4	536
10/8ST-BH	560	612-1368	170-380	11-61	400-850	71	4-10	5	686
12/10ST-BH	560	936-1980	260-550	7-68	300-800	82	6	5	762
14/12ST-BH	560	1260-2772	350-770	13-63	300-600	77	3-10	5	965
16/14ST-BH	560	1368-3060	380-850	11-63	250-550	79	4-10	5	1067
16/14TU-BH	1200
10/8E-BM	120	540-1440	150-400	14-60	600-1100	73	4-10	5	549
10/8R-BM	300

Horizontal Centrifugal Slurry Pump 
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of  slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance. 




FAQ
1. What Products does BODA pump mainly produce? 
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is BODA direct factory or trader? 
BODA own foundry workshop, Machining Workshop, and Assembly workshop. 
Welcome to visit our factory anytime. 

3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump


4. What information is required for quotes? 
If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. 

Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa