| High Frequency Nut Embedding Welding Machine Model:BY-480MZ(GP) |
|
| Item | Detailed Information |
|
| Product Introduction | This equipment is a standard high frequency model, has been used in nut embedded welding. |
| High power high frequency machine can heat the nut instantaneously to meet the welding requirements, can be used for high temperature material embedded. |
| 10 sets of welding programs can be pre-stored, and the data interface can run in tandem with the production line. |
| Products of the same type can be replaced by copying clamp to achieve universal. |
| Equipped with man-machine interface and Chinese and English bilingual interface operation. |
| Adopt SMC cylinder/RONGDA bearing. |
| Machine was designed with integral square tube and metal plate welding to strengthen the overall rigidity, with more stable operation. |
| Production cycle time 25S-35S. |
| Technical Parameters | Equipment demension(L)800MM*(W)1000MM*(H)1700MM. |
| Maximum allowable die size of equipment(L)480MM*(W)300MM*(H)200MM. |
| Electric power requiement: 3 phases 380V 50Hz(If there are special requirements, customer confirmation is required.). |
| The outlet pressure of the air compressor: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA). |
| Adaptable to ambient temperature: -5ºC~40ºC |
| Adaptalbe to humidity : 20%~80% |
| The noise of the transmission part shall not exceed 70 db. |
| Overall Power:6KW |
Complaint
